Adding and Removing Waypoints

Waypoints are points on a road network which are specially flagged by the user. Below is a table showing what types of waypoints are available in Evolution.

Type	Description
Source	Represents an entry point onto the road network from the mining pit or a stockpile.
Destination	Represents an exit point from the road network to a destination such as a mill, stockpile or a waste dump.
Permission	Represents a point in a pathway which only accepts material transported by certain kinds of trucks.
Force	Represents a point in a pathway which included trucks must pass through.

Evolution represents waypoints using what is best described as a 3D tear drop doughnut symbol.

Adding a waypoint

To add a waypoint, follow these steps:

1. Open the equipment setup and go to the Viewer tab.

2. Go into Vertex selection mode.

3. Select a point on the road network.

4. Right-click to open the context menu and select Waypoints.

5. Set the waypoint to a particular source, destination or turn it into a force or permission point.

Deleting a waypoint

You can use one of the following methods to delete a waypoint:

• Select the Waypoint editor from the Viewer toolbar and click on the desired waypoint in the view. Press Delete to delete the waypoint.

• Select Vertex as the selection mode from the Viewer toolbar and select the waypoint by drawing a rectangle around it. Press Delete to delete the waypoint.

  

• Right-click on the desired waypoint in the View Manager and select Remove from the context menu.