mapteksdk.data.geotechnical module
Geotechnical data types.
Currently this only includes discontinuities, however in the future it may be expanded to contain other geotechnical objects such as stereonets.
- class Discontinuity(object_id=None, lock_type=LockType.READWRITE)
Bases:
TopologyA discontinuity (Also known as a tangent plane). These are generally used to mark a change in the physical or chemical characteristics in soil or rock mass.
Discontinuities with similar properties are often placed in special containers known as discontinuity sets.
Examples
The simplest way to define a discontinuity is to define the planar points. This example defines a discontinuity using points in the plane with the equation 3x - y + 2z + 4 = 0. The other properties are automatically derived from the points used to define the discontinuity.
>>> from mapteksdk.project import Project >>> from mapteksdk.data import Discontinuity >>> points = [[1, 1, -3], [-1, 2, 0.5], [-2, -2, 0], ... [0, -2, -3], [-4, 0, 4], [2, 2, -4]] >>> project = Project() >>> with project.new("geotechnical/3x-y+2z+4", Discontinuity) as plane: ... plane.planar_points = points >>> with project.read(plane.id) as read_plane: ... print("Dip: ", read_plane.dip) ... print("Dip direction: ", read_plane.dip_direction) ... print("Location: ", read_plane.location) ... print("Area: ", read_plane.area) ... print("Length: ", read_plane.length) Dip: 1.0068536854342678 Dip direction: 1.8925468811915387 Location: [-0.66666667 0.16666667 -0.91666667] Area: 28.062430400804566 Length: 10.198039027185569
A discontinuity can also be defined by setting the dip, dip direction and location. This is less preferable than the other methods because the discontinuity will not have a length or area.
>>> import math >>> from mapteksdk.project import Project >>> from mapteksdk.data import Discontinuity >>> project = Project() >>> with project.new("geotechnical/simple", Discontinuity) as plane: ... plane.dip = math.pi / 4 ... plane.dip_direction = math.pi / 2 ... plane.location = [4, 2, 1] >>> with project.read(plane.id) as read_plane: ... print("Points", read_plane.planar_points) ... print("Area: ", read_plane.area) ... print("Length: ", read_plane.length) Points [[3.29289322 2. 1.70710678] [4.35355339 1.1339746 0.64644661] [4.35355339 2.8660254 0.64644661]] Area: nan Length: nan
when creating a new discontinuity, it possible to define the planar points and the dip, dip direction and location. This causes the points to be projected onto the plane defined by the dip and dip direction and to be translated to be centred at the specified location. In the below example, though the points are originally centred around the origin and in the XY plane they are translated to be centred around the new centre and to be in the new plane.
>>> import math >>> from mapteksdk.project import Project >>> from mapteksdk.data import Discontinuity >>> points = [[-1, -1, 0], [1, -1, 0], [-1, 1, 0], [1, 1, 0]] >>> project = Project() >>> with project.new("geotechnical/both", Discontinuity) as plane: ... plane.planar_points = points ... plane.dip = math.pi / 4 ... plane.dip_direction = math.pi / 2 ... plane.location = [4, 2, 1] >>> with project.read(plane.id) as read_plane: ... print("Points", read_plane.planar_points) ... print("Dip: ", read_plane.dip) ... print("Dip direction: ", read_plane.dip_direction) ... print("Location: ", read_plane.location) ... print("Area: ", read_plane.area) ... print("Length: ", read_plane.length) Points [[3.29289322 3. 1.70710678] [3.29289322 1. 1.70710678] [4.70710678 3. 0.29289322] [4.70710678 1. 0.29289322]] Dip: 0.7853981633974482 Dip direction: 1.5707963267948966 Location: [4. 2. 1.] Area: 4.0 Length: 2.8284271247461907
- classmethod static_type()
Return the type of a topology as stored in a Project.
This can be used for determining if the type of an object is topology.
- property id: ObjectID[Discontinuity]
Object ID that uniquely references this object in the project.
- Returns
The unique id of this object.
- Return type
- property planar_points
The points used to define the discontinuity. This is an array of floats of shape (n, 3) where n is the planar_point_count. These points are coplanar.
When set the first three of these points are used to define the dip and dip direction. If the first three points are collinear, the resulting discontinuity object will be empty.
- Raises
ValueError – If set to an array containing less than three points.
- property planar_point_count
The number of points used to visualize the discontinuity.
- property planar_facets
The facets used to visualise the discontinuity. These are derived from the points and do not support direct assignment.
If you change planar_points, the corresponding changes to the planar_facets will not occur until save() is called.
- property planar_facet_count
The count of facets used to visualise the discontinuity.
- property planar_colour
The colour of the facets. This is a single value used for all facets.
The alpha value has no effect. This is provided as an RGBA colour for consistency.
- property dip
The dip of the discontinuity. This is the angle in radians the discontinuity is rotated by in the dip direction.
The dip and dip direction, taken together, define the plane the discontinuity lies in. If they are changed, upon save() the planar_points will be projected to lie on the new plane.
- Raises
ValueError – If set to an value which cannot be converted to a float, or is below zero or greater than pi / 2.
Warning
Dip values close to zero cause issues with calculating the dip direction which can result in unintuitive behaviour.
- property dip_direction
The dip direction of the discontinuity. This is the angle in radians around the z axis which the plane is rotated by dip radians.
The dip and dip direction, taken together, define the plane the discontinuity lies in. If they are changed, upon save() the planar_points will be projected to lie on the new plane.
- Raises
ValueError – If set to a value which cannot be converted to a float, or is below zero or greater than or equal to 2 * pi.
Notes
For completely horizontal discontinuities, this may be NaN.
- property strike
The strike of the discontinuity. This is the angle in radians to the y axis of the line of intersection between the discontinuity plane and the horizontal plane (XY plane).
This is derived from the dip direction. Changing the dip direction will change the strike and vice versa.
- Raises
ValueError – If set to a value which cannot be converted to a float, or is below zero or greater than or equal to 2 * pi.
Notes
For completely horizontal discontinuities, this may be NaN.
- property plunge
The plunge angle of the discontinuity.
This is derived from the dip - changing the dip will change the plunge and vice versa.
- Raises
ValueError – If set to a value which cannot be converted to a float, or is below zero or greater than pi / 2.
Notes
The dip and plunge for a discontinuity always add up to pi / 2.
- attribute_names()
Returns a list containing the names of all object-level attributes. Use this to iterate over the object attributes.
- Returns
List containing the attribute names.
- Return type
list
Examples
Iterate over all object attributes of the object stared at “target” and print their values.
>>> from mapteksdk.project import Project >>> project = Project() >>> with project.read("target") as read_object: ... for name in read_object.attribute_names(): ... print(name, ":", read_object.get_attribute(name))
- close()
Closes the object and saves the changes to the Project, preventing any further changes.
- property coordinate_system: CoordinateSystem | None
The coordinate system the points of this object are in.
Warning
Setting this property does not change the points. This is only a label stating the coordinate system the points are in.
Notes
If the object has no coordinate system, this will be None.
Changes are done directly in the project and will not be undone if an error occurs.
Examples
Creating an edge network and setting the coordinate system to be WGS84. Note that setting the coordinate system does not change the points. It is only stating which coordinate system the points are in.
>>> from pyproj import CRS >>> from mapteksdk.project import Project >>> from mapteksdk.data import Polygon >>> project = Project() >>> with project.new("cad/rectangle", Polygon) as new_edges: ... # Coordinates are in the form [longitude, latitude] ... new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]] ... new_edges.coordinate_system = CRS.from_epsg(4326)
Often a standard map projection is not convenient or accurate for a given application. In such cases a local transform can be provided to allow coordinates to be specified in a more convenient system. The below example defines a local transform where the origin is translated 1.2 degrees north and 2.1 degree east, points are scaled to be twice as far from the horizontal origin and the coordinates are rotated 45 degrees clockwise about the horizontal_origin. Note that the points of the polygon are specified in the coordinate system after the local transform has been applied.
>>> import math >>> from pyproj import CRS >>> from mapteksdk.project import Project >>> from mapteksdk.data import Polygon, CoordinateSystem, LocalTransform >>> project = Project() >>> transform = LocalTransform( ... horizontal_origin = [1.2, 2.1], ... horizontal_scale_factor = 2, ... horizontal_rotation = math.pi / 4) >>> system = CoordinateSystem(CRS.from_epsg(20249), transform) >>> with project.new("cad/rectangle_transform", Polygon) as new_edges: ... new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]] ... new_edges.coordinate_system = system
See also
mapteksdk.data.coordinate_systems.CoordinateSystemAllows for a coordinate system to be defined with an optional local transform.
- property created_date: datetime
The date and time (in UTC) of when this object was created.
- Returns
The date and time the object was created. 0:0:0 1/1/1970 if the operation failed.
- Return type
datetime.datetime
- delete_all_attributes()
Delete all object attributes attached to an object.
This only deletes object attributes and has no effect on PrimitiveAttributes.
- Raises
RuntimeError – If all attributes cannot be deleted.
- delete_attribute(attribute)
Deletes a single object-level attribute.
Deleting a non-existent object attribute will not raise an error.
- Parameters
attribute (str) – Name of attribute to delete.
- Returns
True if the object attribute existed and was deleted; False if the object attribute did not exist.
- Return type
bool
- Raises
RuntimeError – If the attribute cannot be deleted.
- dissociate_raster(raster)
Removes the raster from the object.
This is done directly on the Project and will not be undone if an error occurs.
- Parameters
raster (Raster | ObjectID[Raster]) – The raster to dissociate.
- Returns
True if the raster was successfully dissociated from the object, False if the raster was not associated with the object.
- Return type
bool
- Raises
TypeError – If raster is not a Raster.
Notes
This only removes the association between the Raster and the object, it does not clear the registration information from the Raster.
Examples
Dissociate the first raster found on a picked object.
>>> from mapteksdk.project import Project >>> from mapteksdk import operations >>> project = Project() >>> oid = operations.object_pick( ... support_label="Pick an object to remove a raster from.") ... with project.edit(oid) as data_object: ... report = f"There were no raster to remove from {oid.path}" ... for index in data_object.rasters: ... data_object.dissociate_raster(data_object.rasters[index]) ... report = f"Removed raster {index} from {oid.path}" ... break ... # Now that the raster is dissociated and the object is closed, ... # the raster can be associated with a different object. ... operations.write_report("Remove Raster", report)
- get_attribute(name)
Returns the value for the attribute with the specified name.
- Parameters
name (str) – The name of the object attribute to get the value for.
- Returns
The value of the object attribute name. For dtype = datetime.datetime this is an integer representing the number of milliseconds since 1st Jan 1970. For dtype = datetime.date this is a tuple of the form: (year, month, day).
- Return type
ObjectAttributeTypes
- Raises
KeyError – If there is no object attribute called name.
Warning
In the future this function may be changed to return datetime.datetime and datetime.date objects instead of the current representation for object attributes of type datetime.datetime or datetime.date.
- get_attribute_type(name)
Returns the type of the attribute with the specified name.
- Parameters
name (str) – Name of the attribute whose type should be returned.
- Returns
The type of the object attribute name.
- Return type
ObjectAttributeDataTypes
- Raises
KeyError – If there is no object attribute called name.
- get_colour_map()
Return the ID of the colour map object currently associated with this object.
- Returns
The ID of the colour map object or null object ID if there is no colour map.
- Return type
- property lock_type: LockType
Indicates whether operating in read-only or read-write mode.
- Returns
The type of lock on this object. This will be LockType.ReadWrite if the object is open for editing and LockType.Read if the object is open for reading.
- Return type
LockType
- property modified_date: datetime
The date and time (in UTC) of when this object was last modified.
- Returns
The date and time this object was last modified. 0:0:0 1/1/1970 if the operation failed.
- Return type
datetime.datetime
- property rasters: dict[int, ObjectID[Raster]]
A dictionary of raster indices and Object IDs of the raster images currently associated with this object.
The keys are the raster ids and the values are the Object IDs of the associated rasters. Note that all raster ids are integers however they may not be consecutive - for example, an object may have raster ids 0, 1, 5 and 200.
Notes
Rasters with higher indices appear on top of rasters with lower indices. The maximum possible raster id is 255.
Removing a raster from this dictionary will not remove the raster association from the object. Use dissociate_raster to do this.
Examples
Iterate over all rasters on an object and invert the colours. Note that this will fail if there is no object at the path “target” and it will do nothing if no rasters are associated with the target.
>>> from mapteksdk.project import Project >>> project = Project() >>> with project.read("target") as read_object: ... for raster in read_object.rasters.values(): ... with project.edit(raster) as edit_raster: ... edit_raster.pixels[:, :3] = 255 - edit_raster.pixels[:, :3]
- set_attribute(name, dtype, data)
Sets the value for the object attribute with the specified name.
This will overwrite any existing attribute with the specified name.
- Parameters
name – The name of the object attribute for which the value should be set.
dtype – The type of data to assign to the attribute. This should be a type from the ctypes module or datetime.datetime or datetime.date. Passing bool is equivalent to passing ctypes.c_bool. Passing str is equivalent to passing ctypes.c_char_p. Passing int is equivalent to passing ctypes.c_int16. Passing float is equivalent to passing ctypes.c_double.
data – The value to assign to object attribute name. For dtype = datetime.datetime this can either be a datetime object or timestamp which will be passed directly to datetime.utcfromtimestamp(). For dtype = datetime.date this can either be a date object or a tuple of the form: (year, month, day).
- Raises
ValueError – If dtype is an unsupported type.
TypeError – If value is an inappropriate type for object attribute name.
RuntimeError – If a different error occurs.
Warning
Object attributes are saved separately from the object itself - any changes made by this function (assuming it does not raise an error) will be saved even if save() is not called (for example, due to an error being raised by another function).
Examples
Create an object attribute on an object at “target” and then read its value.
>>> import ctypes >>> from mapteksdk.project import Project >>> project = Project() >>> with project.edit("target") as edit_object: ... edit_object.set_attribute("count", ctypes.c_int16, 0) ... with project.read("target") as read_object: ... print(read_object.get_attribute("count")) 0
- property trend
The trend of the discontinuity in radians.
This is derived from the dip direction. Changing the dip direction will change the trend and vice versa.
- Raises
ValueError – If set to a value which cannot be converted to a float, or is below zero or greater than or equal to pi * 2.
- property length
The length of the discontinuity. This is the diameter of the smallest sphere capable of containing all of the points.
Notes
For empty discontinuities, the length will be NaN.
- property location
The location of the discontinuity in the form [X, Y, Z].
By default, this is the mean of the points used to construct the discontinuity.
Notes
For empty discontinuities, this will be NaN.
- property area
The scaled area of the discontinuity.
Changes to the area will not occur until save() is called. This may not be exactly equal to the area of the planar facets.
- save()
Save the changes made to the object.
Generally a user does not need to call this function because it is called automatically at the end of a with block using Project.new() or Project.edit().