Connect

Source file: connect.htm

The Connect option displays the inferred point connectivity of the scan data. This connectivity is based on the acquisition order or topology of the scan.

Connecting scans changes a collection of adjacent scan points into a surface that can be used to overlay a photographic surface. This produces an accurate 3D photographic model that can be used to identify specific surface features.

The Connect option treats all points as next to each other, as seen from the scan origin. To decrease this effect, use Smart connect, which only connects points within a selected range tolerance.

If in object select mode , the entire object will be connected. Alternatively, only select the points to be connected using the point select mode.

1. On the Position and Filter ribbon tab, go to the Scan group and select Connect.

In the example below, there are false cells created from the post to the wall. These can be removed by manually selecting them or by using the Smart connect tool.

2. To overlay the photographic surface to the connected scan, right-click on the surface and from the context menu select View then select Photographic Surface.