Stereonet Contours

Source file: create-stereonet-contours.htm

Stereonet contours are used to help identify discontinuity sets once a stereonet has been created. The contours represent density distributions of poles and can be set as either wireframe or flat shaded regions. You can adjust custom bandwidths of pole distribution and assign custom colours to these bandwidths. Smoothing and Terzaghi weighting are also options.

Note:  Prior to creating great circles, a stereonet must be created.

1. On the Geotechnical ribbon tab, go to the Stereonet group and select Stereonet contours.

   

2. Drag the stereonet into the Stereonet to contour field.

3. Select whether you want Data to contour around poles or intersections.

4. Adjust the colour scale as required. See Modify a colour scale for detailed instructions.

5. Select Smoothing if required.

6. Select Terzaghi weighting if required.

   Note:  Terzaghi weighting uses the measurement orientation to counteract sampling bias.

7. The Minimum angle is the lowest angle between the measurement orientation and the discontinuity that will be used for weighting.

8. Click OK or Apply to generate contours.

The contours are saved in the stereonet container.

Note:  Contours can be displayed as wireframe or flat shaded. Do this from the Home ribbon tab, go to the Colour group. From the Appearance drop-down list select either Wireframe or Flat shaded. Alternatively, right-click on the object to open the context menu, go to View and select a surface appearance type to change the contour display mode.  

Stereonet contour (wireframe) and legend.

Stereonet contour (solid) and legend.