Import

Source file: import-data.htm

The Import drop-down provides the following tools for bringing external data into your project:

Import (Alt+F2)

Import data files from multiple external sources.

Download from Geospatial Manager

Import data directly from a Geospatial Manager project.

Import

The all-in-one Import tool (Alt+F2) enables you to import multiple files of different supported types simultaneously, provided those files are in the same folder.

Importing data files from local or network storage

  • Scan files: .3dd, .3di, .3dp, .3dr, .3dv, .4dd, .asc, .e57, .fls, .ixf,.las, .laz, .mpc, .ptg, .ptx, .r3s, .rsp, .rxp, .toc, .zfs

  • Polygon file format: .ply

  • Triangulation files: .**t, .00t, .dwg, .dxb, .dxf, .obj

  • SRTM height files: .hgt

  • Keyhole markup language files: .kml, .kmz

  • Maptek object files: .maptekobj

  • CAD files: .arch_d, .bmf, .dgd, .txt

  • CSV files: .csv

  • Dynamic image files: .ecw, .jp2

  • Images: .bmp, .bpw, .jpeg, .jpg, .jgw, .png, .pgw, .tif, .tiff, .tfw, .tga

  • Shapefiles: .shp

  • Vulcan design data files: .dgd.isis

  • Vulcan legend files: .scd

Note:  All files to be imported must reside in the same folder.

To import files:

  1. On the Home ribbon tab, in the Data group, click Import.

  2. Click to browse to the data location.

    Tip:  Click All Supported Files to see allowable file types. Also, click above.

  3. Select the files to be imported and click Open.

  4. Where applicable, PointStudio presents options applicable to each of the selected object types. Select the required options for each object.

    5. Note:  Option selections are not needed or requested for these file types: .3dp, .r3s, .ply, .hgt, .kml, .kmz, .maptekobj, .ecw, and .jp2.

    Expand below for detail on import options.

    Applies to: .asc, .3di, .ixf, .las, .laz, .00t, .dxf, .dwg, .dxb, .obj, .bmf, .arch_d, .txt, .csv, .bmp, .bpw, .jgw, .jpeg, .jpg, .pgw, .png, .tfw, .tga, .tif, .tiff, .shp, .dgd, and .dgd.isis

    A wide range of units of length is offered. Simply select the required units from the drop-down list.

    Applies to: .3dv, .3dd, .4dd, .3dr, .e57, .ptg, .ptx, .rxp, .asc, .3di, .ixf, .las, .laz, .fls, .mpc, .toc, .zfs, .rsp, .00t, .dxf, .dwg, .dxb, .obj, .arch_d, .txt, .csv, .shp, .dgd and .dgd.isis

    • If there is a coordinate system associated with a file to be imported, this option will not appear.

    • The default selection is the coordinate system defined in Coordinate systems. Leave this as is to apply the default coordinate system.

    • You can also select New system... from the drop-down, then complete the details per Coordinates. The files will be imported using the new system, but will then be converted to the default coordinate system.

    • For .3dr files, Automatically calculated UTM zone will also appear on the list. Select this to read the GPS coordinates of the scan origin and automatically determine the UTM coordinate system to use for that scan.

    Applies to: .fls, .mpc, .toc and .zfs

    These files often consist of a very large numbers of points. Set the slider at an appropriate level to reduce the number of imported points, making the scan more manageable.

    Applies to: .rsp

    An .rsp file is a project file that references multiple .rxp scans. From the drop-down list, select each .rxp scan file to be imported with the .rsp.

    Applies to: .txt and .csv

    Take one of the following actions:

    • The default selection is Scan. Leave this as is to import the data as a scan.

    • Select one of the other pre-defined options, as appropriate.

    • Select Custom... to import differently formatted ASCII data, then click OK or Apply and follow the procedure Importing custom text and CSV file formats on this page.

    Applies to: .shp

    Select this option to merge the shapefile's edge objects into a single edge network .

    Applies to: .dgd and .dgd.isis

    Click on Specify layers to import to open the layer selection panel. Select the required layers from the list. Select Merge objects for any that you want to combine.

    Applies to: .scd

    Click on the colour swatch to pull-down the palette and select a suitable colour.

  1. When Display imported data is selected, the data will be displayed in a new view window. Clear this option if the imported data are not to be displayed.

  2. Click OK or Apply.

Tip:   You can also import files by dragging them directly from a Windows File Explorer into either a view window or a specific project container. If the latter, data will import without loading and displaying in a view window.

 

Depending on the file types selected, you may be required to make additional choices to finish importing data. Expand the relevant heading below for further instructions.

Having selected a text or CSV file and chosen Custom... from the Import data as field, the Import panel will appear. Continue with the following steps:

  1. Click in the ASCII format list to reveal predefined data formats.

  2. Select New format... from the bottom of the list.

  3. Click the Import data as drop-down list and select the data type to be imported.

  4. In the Rows area, specify which line contains header details, if any, and the line where data commences.

  5. In the Columns area, select the correct options for column delineation.

  6. The Comment character defines the character used in the file to prefix comment text.

  7. Set the column headings according to the data type. Different data types can have different attributes:

    • Points: Must include X, Y coordinates. May include Z and colour RGB data.
    • Scan points: Must include X, Y coordinates. May include Z, colour RGB and intensity data.
    • Survey points: Must include X, Y coordinates and label. May include Z,  an index and date-time.

  8. (Optional) If the custom format is likely to be used frequently, select the Save format as checkbox, then replace the data type in the field with an appropriate name. You can also modify the column heading codes as required.

    The next time data is imported, the newly defined name will appear in the Import test file as and ASCII format lists.

    Tip:  You can delete formats that are no longer required by selecting them from the drop-down list and clicking Remove.

  9. Click OK when done.

It is possible to import file types that are not in the supported files list, provided they contain recognised ASCII data.

  1. In the file selection dialog, click on All supported files and select All files (.*)

  2. Navigate to and select the files to import.

  3. Click Open.

  4. A message will appear indicating that you have selected an unsupported file type, asking if you want to import the files as ASCII. Click Yes to continue.

  5. Proceed as above to define the data format and finish importing.

The files will be imported and their types permanently associated with ASCII. Their types will appear in the support files list under Interpreted as ASCII.

Imported images may have associated world files (types .pgw, .tfw, .bpw, and .jgw, listed above), with the same names. World files specify how aerial images are to be positioned. If there is an associated world file for an image, it will be detected and selected automatically, so there is no need to register the image to a surface.

Important:  Set all monitors to the same resolution to ensure these tools display correctly.

If an image has no associated world file, it will need to be registered. The Import Image panel will open after clicking OK.

  1. Select the required Image registration type from the options:

    • Standard photograph to surface if the image is of a section of a scene to be stitched onto a surface.

    • Panoramic photograph to scan if the image is panoramic, extending all the way around a scene.

      Note:  A panoramic image must be a 360° x 180° spherical projection with an aspect ration of 2:1 (width:height). If it is not, PointStudio will return an error message.

    • Re-use existing position to reuse an existing photographic position on a scan.

    • Update existing image to replace an image on an object, and then adjust or update.

  2. Click OK or Apply.

    A new image import window will appear, according to your selection. Click to see the relevant procedure.

    1. Drag the surface to be associated with the image into the Surface field.

    2. Select the Positioning Method:

      • Two-point requires a minimum of two point pairs to apply the image to a flat surface region.
      • Multi-point requires a minimum of eight point pairs to apply the image to a surface region.
    3. See Applying an image to a surface for detailed instructions.
    Panoramic photograph to scan

    1. Drag the scan to be associated with the image into the Scan field.

    2. Populate the point pairs table by selecting corresponding points in the panoramic image (in the preview window) and the scan (in a view window). Select at lest three point pairs.

    3. Select the remaining options as required:

      • Height correction to compensate for any vertical offset between the camera and scanner.

      • On the Display tab:

        • Select Reprojected image points to compare point pairs in the view window. The image point positions are indicated by magenta lines radiating from the camera position.

        • Select Reprojected world points to compare point pairs in the image window. The scan point positions are displayed as magenta crosses.

    4. Click OK.

    1. Drag the surface to be associated with the image into the Surface field.

    2. Drag the scan or surface with the existing image associated into the Re-use position from image on field.

    3. Select the Source image position.

    4. Click OK.

    1. Drag the surface to be associated with the image into the Surface field.

    2. Select the image to be replaced from the Image to replace field.

    3. Click OK

  3. Click OK when done, then close the import tool.

Auto-importing scan files from USB media

PointStudio can automatically import scan data from Maptek scanners saved on a USB flash drive into an open project.

To import scan files:

  1. In PointStudio, create a new project, or open an existing one.

  2. Insert the flash drive containing the scan files into the PC.

    PointStudio will recognise the files and automatically launch the scan import tool.

  3. Change the location of the scan backup folder if required. The default location displayed is a folder called Maptek Scans in the same path as the project.

  4. (Optional) Select Keep scans on removable drive to retain the original data on the flash drive.

  5. Click Yes.

    PointStudio will import the scan files into the scans container of the open project.

Download from GeoSpatial Manager

The Download from GeoSpatial Manager tool enables you to import surfaces and polygons from a GeoSpatial Manager project for editing and incorporation into a PointStudio project.

To download from GeoSpatial Manager, do the following:

  1. On the Home tab, in the Data group, click Download from GeoSpatial Manager. Alternatively, right-click on the surfaces container in the project explorer and select Download from GeoSpatial Manager from the context menu.

    The Download from GeoSpatial Manager panel will open.

  2. Select the required project from the GeoSpatial Manager Server drop-down. If the drop-down is empty, or does not contain the required project, click , then enter the server address in the subsequent panel and click OK or Apply.

    If the tool panel gives the notification “ Insufficient permissions. Contact your administrator.”, request permissions from your administrator then try connecting to the project again. Alternatively, click Login... or Manage Accounts... and log in as a user with sufficient permissions.

    When you have successfully connected to the project, the panel will indicate “ Connected to server.”

    Tip

    • Click to delete the selected GeoSpatial Manager project from the drop-down list.

    • Click to open and view the selected GeoSpatial Manager project in a web browser.

  3. The Date and time of terrain fields are pre-filled with the current date and time. If you need to download a surface from an earlier time, set the Date and time of terrain fields accordingly.

  4. Set the surface to download via the following options:

    Download existing surface

    Select the required surface from the drop-down.

    Note:  This is only available if any surfaces have already been downloaded from the GeoSpatial Manager project.

    Extract new surface

    Define the surface to download as follows:

    1. Select the correct coordinate system.

    2. Set the surface bounding polygon with the following options:

      • Polygon from server: Choose an option from the drop-down.

        Tip:  Click View to inspect the polygon. PointStudio will download the polygon into the cad container and display it in the active view window.

      • Local polygon: Select and drag a polygon from the project explorer to the Local polygon field.

  5. Set the required resolution from the Level of detail slider.

  6. Click OK or Apply.

The surface will be extracted and downloaded into the surfaces container.