Sequencing Accumulation and Reporting
Products
Use the Products option to create product codes based on conditions applied to block model variables. For example, the product code waste can be defined based on conditions on the grade variables in the block model.
Note: Each product must have an associated condition. Conditions are evaluated from the top down. Therefore, the first condition satisfied in the list will determine the product for each block.
Prerequisites
Before working in this option, it is recommended you first use the Block Models option to select a block model
Products
Name
Enter the product code.
Condition
Enter the desired condition(s) for the product.
- The variables used when defining the conditions will populate the Cutoff drop-down in the Cutoff section of this panel.
- Refer to Appendix B of the Vulcan Core documentation for a full listing of the available operator/functions.
- Blocks that do not meet the conditions for any of the defined products displays "WST_SAR" in the product column report sheet.
Use stock
Stock details
Set maximum tonnage per stock
Set maximum tonnage extraction per period
Set initial status
Stock Extraction Sequence
FIFO
LIFO
Max grade
Min grade
Cutoff
Define the cutoff information for each product with a condition. Each condition defined in the upper grid will have an entry in this area.
Click OK to save your settings.
Related topics
-
Sequence
