Unmask

Use Unmask to remove a mask from a grid mesh model. In order to use this option, the masked grid mesh model must be displayed on the screen. For information on masking grids refer to Mask. It is possible to remove masks from all grid mesh models, that is grids of type <proj><id>.<mv>g where proj is the project, id is the identifier, and mv is the model variable.

---

Instructions

On the Model menu, point to Grid Mesh Surfaces, and then click Unmask.

If there is more than one grid model displayed, then you will be prompted to select the grid mesh surface to unmask. Once the grid model is selected, the mask is removed.

You will then be asked whether you want to save or reject the changes. Save removes the mask and Reject cancels the operation.