| [options] |
The [options] for this executable are:
| -3 |
Redirect output to a Whittle 3D block model file (.mod). |
| -4 |
Redirect output to a Whittle 4D block model file (.mod). |
| -L |
Redirect output to a Whittle Pit List file (.pil). |
| -c |
Redirect output to a CSV formatted dump file (.csv). |
| -o <file> |
Redirect output to a nominated file. You will need to include a file extension, for example '.asc'. |
| -k <file> |
Append output to a nominated file. You will need to include a file extension, for example '.asc'. |
| -v <variable> [value] |
Mask with variable. |
| -t <triangulation> |
Bounding triangulation. |
| -n <top surface> |
Top bounding surface triangulation. |
| -u <lower surface> |
Lower bounding surface triangulation. |
| -B <triangulation> |
Use a single bounding surface. |
| -Z |
Project down the Z-axis, i.e. select the blocks that fall below the nominated surface. If the -Z switch is omitted, then all blocks that fall above the nominated surface will be selected instead.  Note
This switch can only be used when a single bounding surface has been specified. |
| -O |
Select blocks outside the solid only. |
| -bm <xl, xt, yl, yt, zl, zt> |
Define the bounding extents using block model co-ordinates. When using this switch, you will need to specify the minimum and maximum X, Y and Z co-ordinates. |
| -bw <xl, xt, yl, yt, zl, zt> |
Define the bounding extents using real world co-ordinates. When using this switch, you will need to specify the minimum and maximum X, Y and Z co-ordinates. |
| -s <mx, my, mz> |
Sub-block dimensions. |
| -p <a, b, c, d> |
Include planed blocks. |
| -C <condition> |
Use conditional expression. |
| -r <offset> |
Provide a plane offset buffer. |
| -X |
Use proportional volumes against solid. |
|
| <block model> |
Refers to the name of the Vulcan block model file. |
| <dump file> |
Refers to the name and location of the file that will be used to store the exported information. |
