Reset Section

Reset Current Section to Original Position

The Reset Section option to return the current section to its original state (that is, the way it was after running the Create option). It assumes that you already have horizon surfaces and blocks on the section.

Note:   This option cannot be reversed.

---

Instructions

On the Dragline menu, point to Blocks, and then click Reset Section.

Once selected, you will be prompted to update the surfaces and the blocks separately.

If a Dragline specifications file (.rsp) was not opened prior to selecting this option, then the Open Dragline Specification panel displays first.

Open Dragline Specification panel

Spec file name

Enter, or select from the drop-down list, the <spec_file_id> part of the dragline specifications file name. The maximum size is 6 alphanumeric characters. Selecting a name from the drop-down list will open an existing specifications file. Entering a new name will create a new specifications file.

Click OK.