Delete

Delete Vertical Lines

Use the Delete option to delete the vertical lines created using the Create option.

---

Instructions

On the Dragline menu, point to Lines, and then click Delete to display the Delete lines dialog box.

If a Dragline specifications file (.rsp) was not opened prior to selecting this option, then the Open Dragline Specification panel displays first.

Open Dragline Specification panel

Spec file name

Enter, or select from the drop-down list, the <spec_file_id> part of the dragline specifications file name. The maximum size is 6 alphanumeric characters. Selecting a name from the drop-down list will open an existing specifications file. Entering a new name will create a new specifications file.

Click OK.

The Delete lines dialog box contains the following options:

Apply to single line only

Select this option to delete only a single vertical line. You will be prompted to select the line to delete.

Apply to current section only

Select this option to delete all vertical lines from the current section.

Apply to all sections

Select this option to delete all vertical lines from all loaded sections.