View Current Section

Place Current Section into Cross-section View

Use the View Current Section option places the current section into a cross-sectional 3D view, as defined through the Setup option. A loaded section must be made current before using the View Current Section option.

This option can also be accessed by selecting the View Current Section button from the Dragline toolbar.

Immediately upon selection of the option the current section will be put into cross-sectional 3D view.

If a Dragline specifications file (.rsp) was not opened prior to selecting this option, then the Open Dragline Specification panel displays first.

Open Dragline Specification panel

Spec file name

Enter, or select from the drop-down list, the <spec_file_id> part of the dragline specifications file name. The maximum size is 6 alphanumeric characters. Selecting a name from the drop-down list will open an existing specifications file. Entering a new name will create a new specifications file.

Click OK.