
1) Copy UGDEV.prefs into $USERPROFILE directory
2) In Vulcan using the supplied data as the current working directory
3) Open ugdesign.dgd.isis
4) Load layers RAMP and ZONES on the screen
5) Right click on one of the points in layer ZONES and select Label->Point sequence, all points.
5) Run Underground->Development->Interactive Ramp
6) Select the ramp
7) Right click, Add Fixed Point.
8) Pick the segment after the first turn
9) Change the indicate mode to "Snap To Points"
10) Click on Point #2
11) Right Click, Add Fixed Point.
12) Pick the segment after the second corkscrew turn
13) Click on Point #3
14) Change the indicate mode back to "Indicate"
14) Now move all 3 turns out until the ramp turns green indicating that the maximum grade constraint is satisfied.
