Viewing a Road Network

If a Road Network has been imported, viewing options for this are available in the Viewer tab. This allows:

• Toggling between showing the entire Haulage Network or just the selected segments
• Labeling the selected segments
• Colouring the selected segments by an attribute
• Colouring selected segments by return cycle values

Note: The View Manager or Project Explorer may need to be minimised to view all of the road network viewing options if a small screen is being used.

Add Quick Colour/ Quick Filter

A Quick Colour can be applied to the Road Network in the Viewer to display the attribute "label" as shown below.

This can help distinguish in-pit/ex-pit, dump and other roads.

The procedure to add a quick colour is as follows:

1. Select Edge selection.
2. Right-click the Road Network in the View Manager and select the Add Quick Colour option.
3. Open the View Manager tab in the Options Window (see User Interface).
4. Select the column according to which the Road Network will be coloured in the Options Window.

To add a quick filter:

1. Select Edge selection.
2. Right-click the Road Network in the View Manager and select the Add Quick Filter option.
3. Open the View Manager tab in the Options Window (see User Interface).
4. Filter by Gradient, Elevation or choose a double or string column to filter by.