mapteksdk.data.annotations module

Annotation data types.

These data types are useful for marking areas of interest.

Currently this includes:

  • Text2D: Represents 2D text which always faces the view.

  • Text3D: Represents 3D text.

  • Marker: 3D object which can be used to represent a place, route, sign, etc.

class HorizontalAlignment(value)

Bases: Enum

Enum used to represent the horizontal alignment options for 2D and 3D Text.

LEFT = 0
CENTRED = 1
RIGHT = 2
class VerticalAlignment(value)

Bases: Enum

Enum used to represent the vertical alignment options for 2D and 3D text.

TOP = 3
CENTRED = 6
BOTTOM = 4
class FontStyle(value)

Bases: Flag

Enum representing the possible font styles.

This is a flag enum so the values can be combined via bitwise operators.

REGULAR = 0

The Regular font style.

BOLD = 1

The Bold font style.

ITALIC = 2

The Italic font style.

class Text(object_id=None, lock_type=LockType.READWRITE)

Bases: Topology

The abstract base class representing text at a fixed location in space.

This class cannot be instantiated directly - use Text2D or Text3D instead.

Parameters
  • object_id (ObjectID | None) –

  • lock_type (LockType) –

property text: str

The text displayed by this object.

Raises

TypeError – If you attempt to set the text to a non-string value.

property size: float

The size of the text. The default size is 16.

property location: Point

Location of the text as point ([x,y,z]).

property colour: Colour

The colour of the text represented as an RGBA colour.

property vertical_alignment: VerticalAlignment

The vertical alignment of the text.

See the VerticalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the VerticalAlignment enum.

  • ValueError – If an unsupported vertical alignment is read from the Project.

Examples

Setting 3D text to be center aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, VerticalAlignment
>>> project = Project()
>>> with project.new("cad/centre", Text3D) as new_text_3d:
...     new_text_3d.text = "Centre"
...     new_text_3d.vertical_alignment = VerticalAlignment.CENTRED
property horizontal_alignment: HorizontalAlignment

The horizontal alignment of the text.

See the HorizontalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the HorizontalAlignment enum.

  • ValueError – If an unsupported horizontal alignment is read from the Project.

Examples

Setting 3D text to be left aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, HorizontalAlignment
>>> project = Project()
>>> with project.new("cad/left", Text3D) as new_text_3d:
...     new_text_3d.text = "Left"
...     new_text_3d.horizontal_alignment = HorizontalAlignment.LEFT
property font_style: FontStyle

The font style of the text.

See FontStyles enum for the possible values. Note that this is a flag enum and flags can be combined using the | operator.

Raises

TypeError – If set to a value which is not a part of FontStyles.

Examples

Set text to be italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/italic", Text3D) as new_text:
...     new_text.text = "This text is italic"
...     new_text.font_style = FontStyle.ITALIC

Set text to be bold and italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/bolditalic", Text3D) as new_text:
...     new_text.text = "This text is bold and italic"
...     new_text.font_style = FontStyle.BOLD | FontStyle.ITALIC

Print if the text created in the above example is bold.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.read("cad/bolditalic") as read_text:
...     if read_text.font_style & FontStyle.BOLD:
...         print("This text is bold.")
This text is bold.
attribute_names()

Returns a list containing the names of all object-level attributes.

Use this to iterate over the object attributes.

Returns

List containing the attribute names.

Return type

list

Examples

Iterate over all object attributes of the object stared at “target” and print their values.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for name in read_object.attribute_names():
...         print(name, ":", read_object.get_attribute(name))
close()

Closes the object and saves the changes to the Project.

Attempting to read or edit properties of an object after closing it will raise a ReadOnlyError.

property closed: bool

If this object has been closed.

Attempting to read or edit a closed object will raise an ObjectClosedError. Such an error typically indicates an error in the script and should not be caught.

Examples

If the object was opened with the Project.new(), Project.edit() or Project.read() in a “with” block, this will be True until the with block is closed and False afterwards.

>>> with self.project.new("cad/point_set", PointSet) as point_set:
>>>     point_set.points = [[1, 2, 3], [4, 5, 6]]
>>>     print("closed?", point_set.closed)
>>> print("closed?", point_set.closed)
closed? False
closed? True
property coordinate_system: mapteksdk.data.coordinate_systems.CoordinateSystem | None

The coordinate system the points of this object are in.

Raises

ReadOnlyError – If set on an object open for read-only.

Warning

Setting this property does not change the points. This is only a label stating the coordinate system the points are in.

Notes

If the object has no coordinate system, this will be None.

Changes are done directly in the project and will not be undone if an error occurs.

Examples

Creating an edge network and setting the coordinate system to be WGS84. Note that setting the coordinate system does not change the points. It is only stating which coordinate system the points are in.

>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon
>>> project = Project()
>>> with project.new("cad/rectangle", Polygon) as new_edges:
...     # Coordinates are in the form [longitude, latitude]
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = CRS.from_epsg(4326)

Often a standard map projection is not convenient or accurate for a given application. In such cases a local transform can be provided to allow coordinates to be specified in a more convenient system. The below example defines a local transform where the origin is translated 1.2 degrees north and 2.1 degree east, points are scaled to be twice as far from the horizontal origin and the coordinates are rotated 45 degrees clockwise about the horizontal_origin. Note that the points of the polygon are specified in the coordinate system after the local transform has been applied.

>>> import math
>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon, CoordinateSystem, LocalTransform
>>> project = Project()
>>> transform = LocalTransform(
...     horizontal_origin = [1.2, 2.1],
...     horizontal_scale_factor = 2,
...     horizontal_rotation = math.pi / 4)
>>> system = CoordinateSystem(CRS.from_epsg(20249), transform)
>>> with project.new("cad/rectangle_transform", Polygon) as new_edges:
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = system

See also

mapteksdk.data.coordinate_systems.CoordinateSystem

Allows for a coordinate system to be defined with an optional local transform.

property created_date: datetime

The date and time (in UTC) of when this object was created.

Returns

The date and time the object was created. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

delete_all_attributes()

Delete all object attributes attached to an object.

This only deletes object attributes and has no effect on PrimitiveAttributes.

Raises

RuntimeError – If all attributes cannot be deleted.

delete_attribute(attribute)

Deletes a single object-level attribute.

Deleting a non-existent object attribute will not raise an error.

Parameters

attribute (str) – Name of attribute to delete.

Returns

True if the object attribute existed and was deleted; False if the object attribute did not exist.

Return type

bool

Raises

RuntimeError – If the attribute cannot be deleted.

dissociate_raster(raster)

Removes the raster from the object.

This is done directly on the Project and will not be undone if an error occurs.

Parameters

raster (Raster | ObjectID[Raster]) – The raster to dissociate.

Returns

True if the raster was successfully dissociated from the object, False if the raster was not associated with the object.

Return type

bool

Raises
  • TypeError – If raster is not a Raster.

  • ReadOnlyError – If this object is open for read-only.

Notes

This only removes the association between the Raster and the object, it does not clear the registration information from the Raster.

Examples

Dissociate the first raster found on a picked object.

>>> from mapteksdk.project import Project
>>> from mapteksdk import operations
>>> project = Project()
>>> oid = operations.object_pick(
...     support_label="Pick an object to remove a raster from.")
... with project.edit(oid) as data_object:
...     report = f"There were no raster to remove from {oid.path}"
...     for index in data_object.rasters:
...         data_object.dissociate_raster(data_object.rasters[index])
...         report = f"Removed raster {index} from {oid.path}"
...         break
... # Now that the raster is dissociated and the object is closed,
... # the raster can be associated with a different object.
... operations.write_report("Remove Raster", report)
property extent: Extent

The axes aligned bounding extent of the object.

get_attribute(name)

Returns the value for the attribute with the specified name.

Parameters

name (str) – The name of the object attribute to get the value for.

Returns

The value of the object attribute name. For dtype = datetime.datetime this is an integer representing the number of milliseconds since 1st Jan 1970. For dtype = datetime.date this is a tuple of the form: (year, month, day).

Return type

ObjectAttributeTypes

Raises

KeyError – If there is no object attribute called name.

Warning

In the future this function may be changed to return datetime.datetime and datetime.date objects instead of the current representation for object attributes of type datetime.datetime or datetime.date.

get_attribute_type(name)

Returns the type of the attribute with the specified name.

Parameters

name (str) – Name of the attribute whose type should be returned.

Returns

The type of the object attribute name.

Return type

ObjectAttributeDataTypes

Raises

KeyError – If there is no object attribute called name.

get_colour_map()

Return the ID of the colour map object associated with this object.

Returns

The ID of the colour map object or null object ID if there is no colour map.

Return type

ObjectID

property id: ObjectID[DataObject]

Object ID that uniquely references this object in the project.

Returns

The unique id of this object.

Return type

ObjectID

property is_read_only: bool

If this object is read-only.

This will return True if the object was open with Project.read() and False if it was open with Project.edit() or Project.new(). Attempting to edit a read-only object will raise an error.

property lock_type: LockType

Indicates whether operating in read-only or read-write mode.

Use the is_read_only property instead for checking if an object is open for reading or editing.

Returns

The type of lock on this object. This will be LockType.ReadWrite if the object is open for editing and LockType.Read if the object is open for reading.

Return type

LockType

property modified_date: datetime

The date and time (in UTC) of when this object was last modified.

Returns

The date and time this object was last modified. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

property rasters: dict[int, ObjectID[Raster]]

The raster associated with this object.

This is a dictionary of raster indices and Object IDs of the raster images currently associated with this object.

The keys are the raster ids and the values are the Object IDs of the associated rasters. Note that all raster ids are integers however they may not be consecutive - for example, an object may have raster ids 0, 1, 5 and 200.

Notes

Rasters with higher indices appear on top of rasters with lower indices. The maximum possible raster id is 255.

Removing a raster from this dictionary will not remove the raster association from the object. Use dissociate_raster to do this.

Examples

Iterate over all rasters on an object and invert the colours. Note that this will fail if there is no object at the path “target” and it will do nothing if no rasters are associated with the target.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for raster in read_object.rasters.values():
...         with project.edit(raster) as edit_raster:
...             edit_raster.pixels[:, :3] = 255 - edit_raster.pixels[:, :3]
save()

Save the changes made to the object.

Generally a user does not need to call this function, because it is called automatically at the end of a with block using Project.new() or Project.edit().

set_attribute(name, dtype, data)

Sets the value for the object attribute with the specified name.

This will overwrite any existing attribute with the specified name.

Parameters
  • name (str) – The name of the object attribute for which the value should be set.

  • dtype (type[Union[NoneType, Type[NoneType], ctypes.c_bool, ctypes.c_byte, ctypes.c_ubyte, ctypes.c_short, ctypes.c_ushort, ctypes.c_long, ctypes.c_ulong, ctypes.c_longlong, ctypes.c_ulonglong, ctypes.c_float, ctypes.c_double, ctypes.c_char_p, datetime.datetime, datetime.date]] | None) – The type of data to assign to the attribute. This should be a type from the ctypes module or datetime.datetime or datetime.date. Passing bool is equivalent to passing ctypes.c_bool. Passing str is equivalent to passing ctypes.c_char_p. Passing int is equivalent to passing ctypes.c_int16. Passing float is equivalent to passing ctypes.c_double.

  • data (Any) – The value to assign to object attribute name. For dtype = datetime.datetime this can either be a datetime object or timestamp which will be passed directly to datetime.utcfromtimestamp(). For dtype = datetime.date this can either be a date object or a tuple of the form: (year, month, day).

Raises
  • ValueError – If dtype is an unsupported type.

  • TypeError – If value is an inappropriate type for object attribute name.

  • ValueError – If name starts or ends with whitespace or is empty.

  • RuntimeError – If a different error occurs.

Warning

Object attributes are saved separately from the object itself - any changes made by this function (assuming it does not raise an error) will be saved even if save() is not called (for example, due to an error being raised by another function).

Examples

Create an object attribute on an object at “target” and then read its value.

>>> import ctypes
>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("target") as edit_object:
...     edit_object.set_attribute("count", ctypes.c_int16, 0)
... with project.read("target") as read_object:
...     print(read_object.get_attribute("count"))
0
classmethod static_type()

Return the type of a topology as stored in a Project.

This can be used for determining if the type of an object is topology.

class Text2D(object_id=None, lock_type=LockType.READWRITE)

Bases: Text

Allows creation of text at a fixed location in space.

Examples

Creating a new 2D text object at the origin.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text2D
>>> project = Project()
>>> with project.new("cad/text", Text2D) as new_text:
>>>     new_text.location = [0, 0, 0]
>>>     new_text.text = "Hello World"

Editing an existing 2D text object to be size 16 and magenta.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("cad/text") as text:
>>>     text.colour = [255, 0, 255]
>>>     text.size = 16

See also

text-2d

Help page for this class.

Parameters
  • object_id (ObjectID | None) –

  • lock_type (LockType) –

classmethod static_type()

Return the type of 2D text as stored in a Project.

This can be used for determining if the type of an object is a 2D text.

Return type

int

property id: ObjectID[Text2D]

Object ID that uniquely references this object in the project.

Returns

The unique id of this object.

Return type

ObjectID

attribute_names()

Returns a list containing the names of all object-level attributes.

Use this to iterate over the object attributes.

Returns

List containing the attribute names.

Return type

list

Examples

Iterate over all object attributes of the object stared at “target” and print their values.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for name in read_object.attribute_names():
...         print(name, ":", read_object.get_attribute(name))
close()

Closes the object and saves the changes to the Project.

Attempting to read or edit properties of an object after closing it will raise a ReadOnlyError.

property closed: bool

If this object has been closed.

Attempting to read or edit a closed object will raise an ObjectClosedError. Such an error typically indicates an error in the script and should not be caught.

Examples

If the object was opened with the Project.new(), Project.edit() or Project.read() in a “with” block, this will be True until the with block is closed and False afterwards.

>>> with self.project.new("cad/point_set", PointSet) as point_set:
>>>     point_set.points = [[1, 2, 3], [4, 5, 6]]
>>>     print("closed?", point_set.closed)
>>> print("closed?", point_set.closed)
closed? False
closed? True
property colour: Colour

The colour of the text represented as an RGBA colour.

property coordinate_system: mapteksdk.data.coordinate_systems.CoordinateSystem | None

The coordinate system the points of this object are in.

Raises

ReadOnlyError – If set on an object open for read-only.

Warning

Setting this property does not change the points. This is only a label stating the coordinate system the points are in.

Notes

If the object has no coordinate system, this will be None.

Changes are done directly in the project and will not be undone if an error occurs.

Examples

Creating an edge network and setting the coordinate system to be WGS84. Note that setting the coordinate system does not change the points. It is only stating which coordinate system the points are in.

>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon
>>> project = Project()
>>> with project.new("cad/rectangle", Polygon) as new_edges:
...     # Coordinates are in the form [longitude, latitude]
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = CRS.from_epsg(4326)

Often a standard map projection is not convenient or accurate for a given application. In such cases a local transform can be provided to allow coordinates to be specified in a more convenient system. The below example defines a local transform where the origin is translated 1.2 degrees north and 2.1 degree east, points are scaled to be twice as far from the horizontal origin and the coordinates are rotated 45 degrees clockwise about the horizontal_origin. Note that the points of the polygon are specified in the coordinate system after the local transform has been applied.

>>> import math
>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon, CoordinateSystem, LocalTransform
>>> project = Project()
>>> transform = LocalTransform(
...     horizontal_origin = [1.2, 2.1],
...     horizontal_scale_factor = 2,
...     horizontal_rotation = math.pi / 4)
>>> system = CoordinateSystem(CRS.from_epsg(20249), transform)
>>> with project.new("cad/rectangle_transform", Polygon) as new_edges:
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = system

See also

mapteksdk.data.coordinate_systems.CoordinateSystem

Allows for a coordinate system to be defined with an optional local transform.

property created_date: datetime

The date and time (in UTC) of when this object was created.

Returns

The date and time the object was created. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

delete_all_attributes()

Delete all object attributes attached to an object.

This only deletes object attributes and has no effect on PrimitiveAttributes.

Raises

RuntimeError – If all attributes cannot be deleted.

delete_attribute(attribute)

Deletes a single object-level attribute.

Deleting a non-existent object attribute will not raise an error.

Parameters

attribute (str) – Name of attribute to delete.

Returns

True if the object attribute existed and was deleted; False if the object attribute did not exist.

Return type

bool

Raises

RuntimeError – If the attribute cannot be deleted.

dissociate_raster(raster)

Removes the raster from the object.

This is done directly on the Project and will not be undone if an error occurs.

Parameters

raster (Raster | ObjectID[Raster]) – The raster to dissociate.

Returns

True if the raster was successfully dissociated from the object, False if the raster was not associated with the object.

Return type

bool

Raises
  • TypeError – If raster is not a Raster.

  • ReadOnlyError – If this object is open for read-only.

Notes

This only removes the association between the Raster and the object, it does not clear the registration information from the Raster.

Examples

Dissociate the first raster found on a picked object.

>>> from mapteksdk.project import Project
>>> from mapteksdk import operations
>>> project = Project()
>>> oid = operations.object_pick(
...     support_label="Pick an object to remove a raster from.")
... with project.edit(oid) as data_object:
...     report = f"There were no raster to remove from {oid.path}"
...     for index in data_object.rasters:
...         data_object.dissociate_raster(data_object.rasters[index])
...         report = f"Removed raster {index} from {oid.path}"
...         break
... # Now that the raster is dissociated and the object is closed,
... # the raster can be associated with a different object.
... operations.write_report("Remove Raster", report)
property extent: Extent

The axes aligned bounding extent of the object.

property font_style: FontStyle

The font style of the text.

See FontStyles enum for the possible values. Note that this is a flag enum and flags can be combined using the | operator.

Raises

TypeError – If set to a value which is not a part of FontStyles.

Examples

Set text to be italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/italic", Text3D) as new_text:
...     new_text.text = "This text is italic"
...     new_text.font_style = FontStyle.ITALIC

Set text to be bold and italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/bolditalic", Text3D) as new_text:
...     new_text.text = "This text is bold and italic"
...     new_text.font_style = FontStyle.BOLD | FontStyle.ITALIC

Print if the text created in the above example is bold.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.read("cad/bolditalic") as read_text:
...     if read_text.font_style & FontStyle.BOLD:
...         print("This text is bold.")
This text is bold.
get_attribute(name)

Returns the value for the attribute with the specified name.

Parameters

name (str) – The name of the object attribute to get the value for.

Returns

The value of the object attribute name. For dtype = datetime.datetime this is an integer representing the number of milliseconds since 1st Jan 1970. For dtype = datetime.date this is a tuple of the form: (year, month, day).

Return type

ObjectAttributeTypes

Raises

KeyError – If there is no object attribute called name.

Warning

In the future this function may be changed to return datetime.datetime and datetime.date objects instead of the current representation for object attributes of type datetime.datetime or datetime.date.

get_attribute_type(name)

Returns the type of the attribute with the specified name.

Parameters

name (str) – Name of the attribute whose type should be returned.

Returns

The type of the object attribute name.

Return type

ObjectAttributeDataTypes

Raises

KeyError – If there is no object attribute called name.

get_colour_map()

Return the ID of the colour map object associated with this object.

Returns

The ID of the colour map object or null object ID if there is no colour map.

Return type

ObjectID

property horizontal_alignment: HorizontalAlignment

The horizontal alignment of the text.

See the HorizontalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the HorizontalAlignment enum.

  • ValueError – If an unsupported horizontal alignment is read from the Project.

Examples

Setting 3D text to be left aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, HorizontalAlignment
>>> project = Project()
>>> with project.new("cad/left", Text3D) as new_text_3d:
...     new_text_3d.text = "Left"
...     new_text_3d.horizontal_alignment = HorizontalAlignment.LEFT
property is_read_only: bool

If this object is read-only.

This will return True if the object was open with Project.read() and False if it was open with Project.edit() or Project.new(). Attempting to edit a read-only object will raise an error.

property location: Point

Location of the text as point ([x,y,z]).

property lock_type: LockType

Indicates whether operating in read-only or read-write mode.

Use the is_read_only property instead for checking if an object is open for reading or editing.

Returns

The type of lock on this object. This will be LockType.ReadWrite if the object is open for editing and LockType.Read if the object is open for reading.

Return type

LockType

property modified_date: datetime

The date and time (in UTC) of when this object was last modified.

Returns

The date and time this object was last modified. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

property rasters: dict[int, ObjectID[Raster]]

The raster associated with this object.

This is a dictionary of raster indices and Object IDs of the raster images currently associated with this object.

The keys are the raster ids and the values are the Object IDs of the associated rasters. Note that all raster ids are integers however they may not be consecutive - for example, an object may have raster ids 0, 1, 5 and 200.

Notes

Rasters with higher indices appear on top of rasters with lower indices. The maximum possible raster id is 255.

Removing a raster from this dictionary will not remove the raster association from the object. Use dissociate_raster to do this.

Examples

Iterate over all rasters on an object and invert the colours. Note that this will fail if there is no object at the path “target” and it will do nothing if no rasters are associated with the target.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for raster in read_object.rasters.values():
...         with project.edit(raster) as edit_raster:
...             edit_raster.pixels[:, :3] = 255 - edit_raster.pixels[:, :3]
save()

Save the changes made to the object.

Generally a user does not need to call this function, because it is called automatically at the end of a with block using Project.new() or Project.edit().

set_attribute(name, dtype, data)

Sets the value for the object attribute with the specified name.

This will overwrite any existing attribute with the specified name.

Parameters
  • name (str) – The name of the object attribute for which the value should be set.

  • dtype (type[Union[NoneType, Type[NoneType], ctypes.c_bool, ctypes.c_byte, ctypes.c_ubyte, ctypes.c_short, ctypes.c_ushort, ctypes.c_long, ctypes.c_ulong, ctypes.c_longlong, ctypes.c_ulonglong, ctypes.c_float, ctypes.c_double, ctypes.c_char_p, datetime.datetime, datetime.date]] | None) – The type of data to assign to the attribute. This should be a type from the ctypes module or datetime.datetime or datetime.date. Passing bool is equivalent to passing ctypes.c_bool. Passing str is equivalent to passing ctypes.c_char_p. Passing int is equivalent to passing ctypes.c_int16. Passing float is equivalent to passing ctypes.c_double.

  • data (Any) – The value to assign to object attribute name. For dtype = datetime.datetime this can either be a datetime object or timestamp which will be passed directly to datetime.utcfromtimestamp(). For dtype = datetime.date this can either be a date object or a tuple of the form: (year, month, day).

Raises
  • ValueError – If dtype is an unsupported type.

  • TypeError – If value is an inappropriate type for object attribute name.

  • ValueError – If name starts or ends with whitespace or is empty.

  • RuntimeError – If a different error occurs.

Warning

Object attributes are saved separately from the object itself - any changes made by this function (assuming it does not raise an error) will be saved even if save() is not called (for example, due to an error being raised by another function).

Examples

Create an object attribute on an object at “target” and then read its value.

>>> import ctypes
>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("target") as edit_object:
...     edit_object.set_attribute("count", ctypes.c_int16, 0)
... with project.read("target") as read_object:
...     print(read_object.get_attribute("count"))
0
property size: float

The size of the text. The default size is 16.

property text: str

The text displayed by this object.

Raises

TypeError – If you attempt to set the text to a non-string value.

property vertical_alignment: VerticalAlignment

The vertical alignment of the text.

See the VerticalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the VerticalAlignment enum.

  • ValueError – If an unsupported vertical alignment is read from the Project.

Examples

Setting 3D text to be center aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, VerticalAlignment
>>> project = Project()
>>> with project.new("cad/centre", Text3D) as new_text_3d:
...     new_text_3d.text = "Centre"
...     new_text_3d.vertical_alignment = VerticalAlignment.CENTRED
class Text3D(object_id=None, lock_type=LockType.READWRITE)

Bases: Text

Allows creation of three dimensional text at a fixed location and size.

See also

text-3d

Help page for this class.

Parameters
  • object_id (ObjectID | None) –

  • lock_type (LockType) –

class Facing(value)

Bases: Enum

Enum representing the possible facing values for 3D text.

NO_FACING = 0

The text will not be camera or viewer facing.

Depending on the angle it is viewed from, the text may be upside down, back-to-front or both.

CAMERA_FACING = 1

The text will rotate to always face towards the camera.

Regardless of the angle it is viewed at, the text will never be upside down or back-to-front.

This causes direction and up direction of the text to be ignored.

VIEWER_FACING = 2

The text will automatically flip so that it never appears upside down.

Viewer facing text can still be back-to-front.

classmethod static_type()

Return the type of 3D text as stored in a Project.

This can be used for determining if the type of an object is a 3D text.

property id: ObjectID[Text3D]

Object ID that uniquely references this object in the project.

Returns

The unique id of this object.

Return type

ObjectID

property direction: Vector3D

The 3D direction vector of the text.

This is the direction vector from the start of the first character to the end of the last character.

property up_direction: Vector3D

The 3D direction vector of the text.

This is the direction vector from the bottom of the text to the top.

property always_visible: bool

If the text will be visible through other objects.

If set to true, the 3D text will be visible with a faded out appearance when there are objects between the text and the view. This is False by default.

Raises

TypeError – If set to a value which is not a bool.

property facing: Facing

Where the text will face.

By default this is Text3D.Facing.VIEWER_FACING which causes the text to never appear upside down, even when viewed from the back.

See the values of the Text3D.Facing enum for possible options.

Raises

TypeError – If set to a value which is not Text3D.Facing.

Examples

Set text containing a smiley face to be always camera facing so that it will always be smiling even when viewed from the back.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D
>>> project = Project()
>>> with project.new("cad/smile", Text3D) as new_text:
...     new_text.text = ":)"
...     new_text.facing = Text3D.Facing.CAMERA_FACING
attribute_names()

Returns a list containing the names of all object-level attributes.

Use this to iterate over the object attributes.

Returns

List containing the attribute names.

Return type

list

Examples

Iterate over all object attributes of the object stared at “target” and print their values.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for name in read_object.attribute_names():
...         print(name, ":", read_object.get_attribute(name))
close()

Closes the object and saves the changes to the Project.

Attempting to read or edit properties of an object after closing it will raise a ReadOnlyError.

property closed: bool

If this object has been closed.

Attempting to read or edit a closed object will raise an ObjectClosedError. Such an error typically indicates an error in the script and should not be caught.

Examples

If the object was opened with the Project.new(), Project.edit() or Project.read() in a “with” block, this will be True until the with block is closed and False afterwards.

>>> with self.project.new("cad/point_set", PointSet) as point_set:
>>>     point_set.points = [[1, 2, 3], [4, 5, 6]]
>>>     print("closed?", point_set.closed)
>>> print("closed?", point_set.closed)
closed? False
closed? True
property colour: Colour

The colour of the text represented as an RGBA colour.

property coordinate_system: mapteksdk.data.coordinate_systems.CoordinateSystem | None

The coordinate system the points of this object are in.

Raises

ReadOnlyError – If set on an object open for read-only.

Warning

Setting this property does not change the points. This is only a label stating the coordinate system the points are in.

Notes

If the object has no coordinate system, this will be None.

Changes are done directly in the project and will not be undone if an error occurs.

Examples

Creating an edge network and setting the coordinate system to be WGS84. Note that setting the coordinate system does not change the points. It is only stating which coordinate system the points are in.

>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon
>>> project = Project()
>>> with project.new("cad/rectangle", Polygon) as new_edges:
...     # Coordinates are in the form [longitude, latitude]
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = CRS.from_epsg(4326)

Often a standard map projection is not convenient or accurate for a given application. In such cases a local transform can be provided to allow coordinates to be specified in a more convenient system. The below example defines a local transform where the origin is translated 1.2 degrees north and 2.1 degree east, points are scaled to be twice as far from the horizontal origin and the coordinates are rotated 45 degrees clockwise about the horizontal_origin. Note that the points of the polygon are specified in the coordinate system after the local transform has been applied.

>>> import math
>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon, CoordinateSystem, LocalTransform
>>> project = Project()
>>> transform = LocalTransform(
...     horizontal_origin = [1.2, 2.1],
...     horizontal_scale_factor = 2,
...     horizontal_rotation = math.pi / 4)
>>> system = CoordinateSystem(CRS.from_epsg(20249), transform)
>>> with project.new("cad/rectangle_transform", Polygon) as new_edges:
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = system

See also

mapteksdk.data.coordinate_systems.CoordinateSystem

Allows for a coordinate system to be defined with an optional local transform.

property created_date: datetime

The date and time (in UTC) of when this object was created.

Returns

The date and time the object was created. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

delete_all_attributes()

Delete all object attributes attached to an object.

This only deletes object attributes and has no effect on PrimitiveAttributes.

Raises

RuntimeError – If all attributes cannot be deleted.

delete_attribute(attribute)

Deletes a single object-level attribute.

Deleting a non-existent object attribute will not raise an error.

Parameters

attribute (str) – Name of attribute to delete.

Returns

True if the object attribute existed and was deleted; False if the object attribute did not exist.

Return type

bool

Raises

RuntimeError – If the attribute cannot be deleted.

dissociate_raster(raster)

Removes the raster from the object.

This is done directly on the Project and will not be undone if an error occurs.

Parameters

raster (Raster | ObjectID[Raster]) – The raster to dissociate.

Returns

True if the raster was successfully dissociated from the object, False if the raster was not associated with the object.

Return type

bool

Raises
  • TypeError – If raster is not a Raster.

  • ReadOnlyError – If this object is open for read-only.

Notes

This only removes the association between the Raster and the object, it does not clear the registration information from the Raster.

Examples

Dissociate the first raster found on a picked object.

>>> from mapteksdk.project import Project
>>> from mapteksdk import operations
>>> project = Project()
>>> oid = operations.object_pick(
...     support_label="Pick an object to remove a raster from.")
... with project.edit(oid) as data_object:
...     report = f"There were no raster to remove from {oid.path}"
...     for index in data_object.rasters:
...         data_object.dissociate_raster(data_object.rasters[index])
...         report = f"Removed raster {index} from {oid.path}"
...         break
... # Now that the raster is dissociated and the object is closed,
... # the raster can be associated with a different object.
... operations.write_report("Remove Raster", report)
property extent: Extent

The axes aligned bounding extent of the object.

property font_style: FontStyle

The font style of the text.

See FontStyles enum for the possible values. Note that this is a flag enum and flags can be combined using the | operator.

Raises

TypeError – If set to a value which is not a part of FontStyles.

Examples

Set text to be italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/italic", Text3D) as new_text:
...     new_text.text = "This text is italic"
...     new_text.font_style = FontStyle.ITALIC

Set text to be bold and italic.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.new("cad/bolditalic", Text3D) as new_text:
...     new_text.text = "This text is bold and italic"
...     new_text.font_style = FontStyle.BOLD | FontStyle.ITALIC

Print if the text created in the above example is bold.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, FontStyle
>>> project = Project()
>>> with project.read("cad/bolditalic") as read_text:
...     if read_text.font_style & FontStyle.BOLD:
...         print("This text is bold.")
This text is bold.
get_attribute(name)

Returns the value for the attribute with the specified name.

Parameters

name (str) – The name of the object attribute to get the value for.

Returns

The value of the object attribute name. For dtype = datetime.datetime this is an integer representing the number of milliseconds since 1st Jan 1970. For dtype = datetime.date this is a tuple of the form: (year, month, day).

Return type

ObjectAttributeTypes

Raises

KeyError – If there is no object attribute called name.

Warning

In the future this function may be changed to return datetime.datetime and datetime.date objects instead of the current representation for object attributes of type datetime.datetime or datetime.date.

get_attribute_type(name)

Returns the type of the attribute with the specified name.

Parameters

name (str) – Name of the attribute whose type should be returned.

Returns

The type of the object attribute name.

Return type

ObjectAttributeDataTypes

Raises

KeyError – If there is no object attribute called name.

get_colour_map()

Return the ID of the colour map object associated with this object.

Returns

The ID of the colour map object or null object ID if there is no colour map.

Return type

ObjectID

property horizontal_alignment: HorizontalAlignment

The horizontal alignment of the text.

See the HorizontalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the HorizontalAlignment enum.

  • ValueError – If an unsupported horizontal alignment is read from the Project.

Examples

Setting 3D text to be left aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, HorizontalAlignment
>>> project = Project()
>>> with project.new("cad/left", Text3D) as new_text_3d:
...     new_text_3d.text = "Left"
...     new_text_3d.horizontal_alignment = HorizontalAlignment.LEFT
property is_read_only: bool

If this object is read-only.

This will return True if the object was open with Project.read() and False if it was open with Project.edit() or Project.new(). Attempting to edit a read-only object will raise an error.

property location: Point

Location of the text as point ([x,y,z]).

property lock_type: LockType

Indicates whether operating in read-only or read-write mode.

Use the is_read_only property instead for checking if an object is open for reading or editing.

Returns

The type of lock on this object. This will be LockType.ReadWrite if the object is open for editing and LockType.Read if the object is open for reading.

Return type

LockType

property modified_date: datetime

The date and time (in UTC) of when this object was last modified.

Returns

The date and time this object was last modified. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

property rasters: dict[int, ObjectID[Raster]]

The raster associated with this object.

This is a dictionary of raster indices and Object IDs of the raster images currently associated with this object.

The keys are the raster ids and the values are the Object IDs of the associated rasters. Note that all raster ids are integers however they may not be consecutive - for example, an object may have raster ids 0, 1, 5 and 200.

Notes

Rasters with higher indices appear on top of rasters with lower indices. The maximum possible raster id is 255.

Removing a raster from this dictionary will not remove the raster association from the object. Use dissociate_raster to do this.

Examples

Iterate over all rasters on an object and invert the colours. Note that this will fail if there is no object at the path “target” and it will do nothing if no rasters are associated with the target.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for raster in read_object.rasters.values():
...         with project.edit(raster) as edit_raster:
...             edit_raster.pixels[:, :3] = 255 - edit_raster.pixels[:, :3]
save()

Save the changes made to the object.

Generally a user does not need to call this function, because it is called automatically at the end of a with block using Project.new() or Project.edit().

set_attribute(name, dtype, data)

Sets the value for the object attribute with the specified name.

This will overwrite any existing attribute with the specified name.

Parameters
  • name (str) – The name of the object attribute for which the value should be set.

  • dtype (type[Union[NoneType, Type[NoneType], ctypes.c_bool, ctypes.c_byte, ctypes.c_ubyte, ctypes.c_short, ctypes.c_ushort, ctypes.c_long, ctypes.c_ulong, ctypes.c_longlong, ctypes.c_ulonglong, ctypes.c_float, ctypes.c_double, ctypes.c_char_p, datetime.datetime, datetime.date]] | None) – The type of data to assign to the attribute. This should be a type from the ctypes module or datetime.datetime or datetime.date. Passing bool is equivalent to passing ctypes.c_bool. Passing str is equivalent to passing ctypes.c_char_p. Passing int is equivalent to passing ctypes.c_int16. Passing float is equivalent to passing ctypes.c_double.

  • data (Any) – The value to assign to object attribute name. For dtype = datetime.datetime this can either be a datetime object or timestamp which will be passed directly to datetime.utcfromtimestamp(). For dtype = datetime.date this can either be a date object or a tuple of the form: (year, month, day).

Raises
  • ValueError – If dtype is an unsupported type.

  • TypeError – If value is an inappropriate type for object attribute name.

  • ValueError – If name starts or ends with whitespace or is empty.

  • RuntimeError – If a different error occurs.

Warning

Object attributes are saved separately from the object itself - any changes made by this function (assuming it does not raise an error) will be saved even if save() is not called (for example, due to an error being raised by another function).

Examples

Create an object attribute on an object at “target” and then read its value.

>>> import ctypes
>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("target") as edit_object:
...     edit_object.set_attribute("count", ctypes.c_int16, 0)
... with project.read("target") as read_object:
...     print(read_object.get_attribute("count"))
0
property size: float

The size of the text. The default size is 16.

property text: str

The text displayed by this object.

Raises

TypeError – If you attempt to set the text to a non-string value.

property vertical_alignment: VerticalAlignment

The vertical alignment of the text.

See the VerticalAlignment enum for valid values.

Raises
  • TypeError – If attempting to set to a value which is not from the VerticalAlignment enum.

  • ValueError – If an unsupported vertical alignment is read from the Project.

Examples

Setting 3D text to be center aligned.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Text3D, VerticalAlignment
>>> project = Project()
>>> with project.new("cad/centre", Text3D) as new_text_3d:
...     new_text_3d.text = "Centre"
...     new_text_3d.vertical_alignment = VerticalAlignment.CENTRED
class Marker(object_id=None, lock_type=LockType.READWRITE)

Bases: Topology, RotationMixin

Provides a visual representation for a sign.

This can be used to mark locations.

See also

marker

Help page for this class.

Examples

Create a red diamond-shaped Marker with white text at [1, 2, 3].

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Marker
>>> project = Project()
>>> with project.new("cad/diamond", Marker) as new_marker:
>>>     new_marker.text = "White"
>>>     new_marker.marker_colour = [255, 0, 0]
>>>     new_marker.text_colour = [255, 255, 255]
>>>     new_marker.shape = Marker.Shape.DIAMOND
>>>     new_marker.location = [1, 2, 3]

Rotate an existing marker by 45 degrees.

>>> import math
>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("cad/diamond") as marker:
>>>     marker.rotate_2d(math.radians(45))
class Shape(value)

Bases: IntEnum

Different shapes or styles that a marker can be.

A marker can have a custom shape where a Surface provides the shape.

A_FRAME_OPEN = 0

The marker is shaped like an A-frame.

This shape is similar to a crime scene evidence marker or a cleaning in progress sign with the name of the marker on both surfaces.

DIAMOND = 1

An 8 facet diamond with the name appearing on all surfaces.

CUBE = 2

A cube with name on all the sides excluding top and bottom.

VERTICAL_SIGN = 3

A simple vertical billboard.

A_FRAME_SIGN = 4

A triangular prism billboard.

This is similar to A_FRAME_OPEN but solid and placed on a pole.

THREE_SIDED_SIGN = 5

A triangular prism billboard with the triangle in the XY plane

HORIZONTAL_SIGN = 6

A billboard aligned with the XY plane.

ZEBRA_SCALE = 7

A striped scale bar.

CHECKERED_SCALE = 8

A scale bar in checkerboard pattern.

U_SCALE = 9

A U-Shaped scale bar in uniform colour.

PRONE_HUMAN = 10

A prone human shaped marker.

UPRIGHT_HUMAN = 11

An upright human shaped marker with a pedestal.

COMPASS_ROSE = 12

A 3D compass rose marker.

CUSTOM = 255

The marker uses a custom shape.

The custom shape is set by assigning a Surface to the custom_shape_object property.

attribute_names()

Returns a list containing the names of all object-level attributes.

Use this to iterate over the object attributes.

Returns

List containing the attribute names.

Return type

list

Examples

Iterate over all object attributes of the object stared at “target” and print their values.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for name in read_object.attribute_names():
...         print(name, ":", read_object.get_attribute(name))
close()

Closes the object and saves the changes to the Project.

Attempting to read or edit properties of an object after closing it will raise a ReadOnlyError.

property closed: bool

If this object has been closed.

Attempting to read or edit a closed object will raise an ObjectClosedError. Such an error typically indicates an error in the script and should not be caught.

Examples

If the object was opened with the Project.new(), Project.edit() or Project.read() in a “with” block, this will be True until the with block is closed and False afterwards.

>>> with self.project.new("cad/point_set", PointSet) as point_set:
>>>     point_set.points = [[1, 2, 3], [4, 5, 6]]
>>>     print("closed?", point_set.closed)
>>> print("closed?", point_set.closed)
closed? False
closed? True
property coordinate_system: mapteksdk.data.coordinate_systems.CoordinateSystem | None

The coordinate system the points of this object are in.

Raises

ReadOnlyError – If set on an object open for read-only.

Warning

Setting this property does not change the points. This is only a label stating the coordinate system the points are in.

Notes

If the object has no coordinate system, this will be None.

Changes are done directly in the project and will not be undone if an error occurs.

Examples

Creating an edge network and setting the coordinate system to be WGS84. Note that setting the coordinate system does not change the points. It is only stating which coordinate system the points are in.

>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon
>>> project = Project()
>>> with project.new("cad/rectangle", Polygon) as new_edges:
...     # Coordinates are in the form [longitude, latitude]
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = CRS.from_epsg(4326)

Often a standard map projection is not convenient or accurate for a given application. In such cases a local transform can be provided to allow coordinates to be specified in a more convenient system. The below example defines a local transform where the origin is translated 1.2 degrees north and 2.1 degree east, points are scaled to be twice as far from the horizontal origin and the coordinates are rotated 45 degrees clockwise about the horizontal_origin. Note that the points of the polygon are specified in the coordinate system after the local transform has been applied.

>>> import math
>>> from pyproj import CRS
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Polygon, CoordinateSystem, LocalTransform
>>> project = Project()
>>> transform = LocalTransform(
...     horizontal_origin = [1.2, 2.1],
...     horizontal_scale_factor = 2,
...     horizontal_rotation = math.pi / 4)
>>> system = CoordinateSystem(CRS.from_epsg(20249), transform)
>>> with project.new("cad/rectangle_transform", Polygon) as new_edges:
...     new_edges.points = [[112, 9], [112, 44], [154, 44], [154, 9]]
...     new_edges.coordinate_system = system

See also

mapteksdk.data.coordinate_systems.CoordinateSystem

Allows for a coordinate system to be defined with an optional local transform.

property created_date: datetime

The date and time (in UTC) of when this object was created.

Returns

The date and time the object was created. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

delete_all_attributes()

Delete all object attributes attached to an object.

This only deletes object attributes and has no effect on PrimitiveAttributes.

Raises

RuntimeError – If all attributes cannot be deleted.

delete_attribute(attribute)

Deletes a single object-level attribute.

Deleting a non-existent object attribute will not raise an error.

Parameters

attribute (str) – Name of attribute to delete.

Returns

True if the object attribute existed and was deleted; False if the object attribute did not exist.

Return type

bool

Raises

RuntimeError – If the attribute cannot be deleted.

dissociate_raster(raster)

Removes the raster from the object.

This is done directly on the Project and will not be undone if an error occurs.

Parameters

raster (Raster | ObjectID[Raster]) – The raster to dissociate.

Returns

True if the raster was successfully dissociated from the object, False if the raster was not associated with the object.

Return type

bool

Raises
  • TypeError – If raster is not a Raster.

  • ReadOnlyError – If this object is open for read-only.

Notes

This only removes the association between the Raster and the object, it does not clear the registration information from the Raster.

Examples

Dissociate the first raster found on a picked object.

>>> from mapteksdk.project import Project
>>> from mapteksdk import operations
>>> project = Project()
>>> oid = operations.object_pick(
...     support_label="Pick an object to remove a raster from.")
... with project.edit(oid) as data_object:
...     report = f"There were no raster to remove from {oid.path}"
...     for index in data_object.rasters:
...         data_object.dissociate_raster(data_object.rasters[index])
...         report = f"Removed raster {index} from {oid.path}"
...         break
... # Now that the raster is dissociated and the object is closed,
... # the raster can be associated with a different object.
... operations.write_report("Remove Raster", report)
property extent: Extent

The axes aligned bounding extent of the object.

get_attribute(name)

Returns the value for the attribute with the specified name.

Parameters

name (str) – The name of the object attribute to get the value for.

Returns

The value of the object attribute name. For dtype = datetime.datetime this is an integer representing the number of milliseconds since 1st Jan 1970. For dtype = datetime.date this is a tuple of the form: (year, month, day).

Return type

ObjectAttributeTypes

Raises

KeyError – If there is no object attribute called name.

Warning

In the future this function may be changed to return datetime.datetime and datetime.date objects instead of the current representation for object attributes of type datetime.datetime or datetime.date.

get_attribute_type(name)

Returns the type of the attribute with the specified name.

Parameters

name (str) – Name of the attribute whose type should be returned.

Returns

The type of the object attribute name.

Return type

ObjectAttributeDataTypes

Raises

KeyError – If there is no object attribute called name.

get_colour_map()

Return the ID of the colour map object associated with this object.

Returns

The ID of the colour map object or null object ID if there is no colour map.

Return type

ObjectID

property heading_pitch_roll: tuple[float, float, float]

The heading, pitch and roll angles for this rotation.

The heading is defined as the angle of the rotation about the -z axis. The pitch is defined as the angle of the rotation about the x axis. The roll is defined as the rotation about the y axis.

property is_read_only: bool

If this object is read-only.

This will return True if the object was open with Project.read() and False if it was open with Project.edit() or Project.new(). Attempting to edit a read-only object will raise an error.

property lock_type: LockType

Indicates whether operating in read-only or read-write mode.

Use the is_read_only property instead for checking if an object is open for reading or editing.

Returns

The type of lock on this object. This will be LockType.ReadWrite if the object is open for editing and LockType.Read if the object is open for reading.

Return type

LockType

property modified_date: datetime

The date and time (in UTC) of when this object was last modified.

Returns

The date and time this object was last modified. 0:0:0 1/1/1970 if the operation failed.

Return type

datetime.datetime

property orientation: tuple[float, float, float]

The rotation represented as Vulcan-style dip, plunge and bearing.

This is the tuple: (dip, plunge, bearing) where each value is in radians.

This is defined differently for ellipsoids to ensure consistency with the dip, plunge and bearing displayed in applications.

Notes

This is a derived property. It is recalculated each time this is called.

property rasters: dict[int, ObjectID[Raster]]

The raster associated with this object.

This is a dictionary of raster indices and Object IDs of the raster images currently associated with this object.

The keys are the raster ids and the values are the Object IDs of the associated rasters. Note that all raster ids are integers however they may not be consecutive - for example, an object may have raster ids 0, 1, 5 and 200.

Notes

Rasters with higher indices appear on top of rasters with lower indices. The maximum possible raster id is 255.

Removing a raster from this dictionary will not remove the raster association from the object. Use dissociate_raster to do this.

Examples

Iterate over all rasters on an object and invert the colours. Note that this will fail if there is no object at the path “target” and it will do nothing if no rasters are associated with the target.

>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.read("target") as read_object:
...     for raster in read_object.rasters.values():
...         with project.edit(raster) as edit_raster:
...             edit_raster.pixels[:, :3] = 255 - edit_raster.pixels[:, :3]
rotate(angle, axis)

Rotates the object by the specified angle around the specified axis.

Parameters
  • angle (float) – The angle to rotate by in radians. Positive is clockwise, negative is anticlockwise (When looking in the direction of axis).

  • axis (Axis) – The axis to rotate by.

Raises

ReadOnlyError – If this object is open for read-only.

Examples

Create a 2x2x2 dense block model which is rotated by pi / 4 radians (45 degrees) around the X axis.

>>> import math
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import DenseBlockModel, Axis
>>> project = Project()
>>> with project.new("blockmodels/dense_rotated", DenseBlockModel(
...         x_res=1, y_res=1, z_res=1,
...         x_count=2, y_count=2, z_count=3)) as new_model:
...     new_model.rotate(math.pi / 4, Axis.X)

If you want to specify the angle in degrees instead of radians, use the math.radians function. Additionally rotate can be called multiple times to rotate the block model in multiple axes. Both of these are shown in the below example. The resulting block model is rotated 32 degrees around the Y axis and 97 degrees around the Z axis.

>>> import math
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import DenseBlockModel, Axis
>>> project = Project()
>>> with project.new("blockmodels/dense_rotated_degrees", DenseBlockModel(
...         x_res=1, y_res=1, z_res=1,
...         x_count=2, y_count=2, z_count=3)) as new_model:
...     new_model.rotate(math.radians(32), Axis.Y)
...     new_model.rotate(math.radians(97), Axis.Z)
rotate_2d(angle)

Rotates the object in two dimensions. This is equivalent to rotate with axis=Axis.Z

Parameters

angle (float) – The angle to rotate by in radians. Positive is clockwise, negative is anticlockwise.

Raises

ReadOnlyError – If this object is open for read-only.

property rotation: float

Returns the magnitude of the rotation of the object in radians.

This value is the total rotation of the object relative to its original position.

Notes

If the object has been rotated in multiple axes, this will not be the sum of the rotations performed. For example, a rotation of 90 degrees around the X axis, followed by a rotation of 90 degrees around the Y axis corresponds to a single rotation of 120 degrees so this function would return (2 * pi) / 3 radians.

save()

Save the changes made to the object.

Generally a user does not need to call this function, because it is called automatically at the end of a with block using Project.new() or Project.edit().

set_attribute(name, dtype, data)

Sets the value for the object attribute with the specified name.

This will overwrite any existing attribute with the specified name.

Parameters
  • name (str) – The name of the object attribute for which the value should be set.

  • dtype (type[Union[NoneType, Type[NoneType], ctypes.c_bool, ctypes.c_byte, ctypes.c_ubyte, ctypes.c_short, ctypes.c_ushort, ctypes.c_long, ctypes.c_ulong, ctypes.c_longlong, ctypes.c_ulonglong, ctypes.c_float, ctypes.c_double, ctypes.c_char_p, datetime.datetime, datetime.date]] | None) – The type of data to assign to the attribute. This should be a type from the ctypes module or datetime.datetime or datetime.date. Passing bool is equivalent to passing ctypes.c_bool. Passing str is equivalent to passing ctypes.c_char_p. Passing int is equivalent to passing ctypes.c_int16. Passing float is equivalent to passing ctypes.c_double.

  • data (Any) – The value to assign to object attribute name. For dtype = datetime.datetime this can either be a datetime object or timestamp which will be passed directly to datetime.utcfromtimestamp(). For dtype = datetime.date this can either be a date object or a tuple of the form: (year, month, day).

Raises
  • ValueError – If dtype is an unsupported type.

  • TypeError – If value is an inappropriate type for object attribute name.

  • ValueError – If name starts or ends with whitespace or is empty.

  • RuntimeError – If a different error occurs.

Warning

Object attributes are saved separately from the object itself - any changes made by this function (assuming it does not raise an error) will be saved even if save() is not called (for example, due to an error being raised by another function).

Examples

Create an object attribute on an object at “target” and then read its value.

>>> import ctypes
>>> from mapteksdk.project import Project
>>> project = Project()
>>> with project.edit("target") as edit_object:
...     edit_object.set_attribute("count", ctypes.c_int16, 0)
... with project.read("target") as read_object:
...     print(read_object.get_attribute("count"))
0
set_heading_pitch_roll(heading, pitch, roll)

Replace the existing rotation with specified heading, pitch and roll.

Parameters
  • heading (float) – Angle in radians of the rotation about the -z axis. This should be between 0 and 2 * pi radians (inclusive).

  • pitch (float) – Angle in radians of the rotation about the x axis. This should be between -pi / 2 and pi / 2 radians (inclusive).

  • roll (float) – Angle in radians of the rotation about the y axis. This should be between -pi / 2 and pi / 2 radians (inclusive).

Raises

ValueError – If heading < 0 or heading > 2 * pi. If pitch < -pi / 2 or pitch > pi / 2. If roll < -pi / 2 or roll > pi / 2.

set_orientation(dip, plunge, bearing)

Overwrite the existing rotation with dip, plunge and bearing.

For block models, an orientation of (dip, plunge, bearing) radians is equivalent to rotating the model -dip radians around the X axis, -plunge radians around the Y axis and -(bearing - pi / 2) radians around the Z axis.

For ellipsoids, set_orientation(dip, plunge, bearing) is equivalent to set_heading_pitch_roll(bearing, plunge, -dip)

Parameters
  • dip (float) – Relative rotation of the Y axis around the X axis in radians. This should be between -pi and pi (inclusive).

  • plunge (float) – Relative rotation of the X axis around the Y axis in radians. This should be between -pi / 2 and pi / 2 (exclusive).

  • bearing (float) – Absolute bearing of the X axis around the Z axis in radians. For block models, this should be between -pi and pi (inclusive) For ellipsoids, this should be between -pi / 2 and pi / 2 (exclusive).

Raises
  • TypeError – If dip, plunge or bearing are not numbers.

  • ReadOnlyError – If this object is not open for editing.

Examples

Set orientation of a new 3x3x3 block model to be plunge = 45 degrees, dip = 30 degrees and bearing = -50 degrees

>>> import math
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import DenseBlockModel
>>> project = Project()
>>> with project.new("blockmodels/model_1", DenseBlockModel(
...         x_res=1, y_res=1, z_res=1,
...         x_count=3, y_count=3, z_count=3)) as new_model:
>>>     new_model.set_orientation(math.radians(45),
...                               math.radians(30),
...                               math.radians(-50))

Copy the rotation from one block model to another. Requires two block models.

>>> from mapteksdk.project import Project
>>> from mapteksdk.data import DenseBlockModel
>>> project = Project()
>>> with project.edit("blockmodels/model_1") as model_1:
...     with project.edit("blockmodels/model_2") as model_2:
...         model_2.set_orientation(*model_1.orientation)
set_rotation(angle, axis)

Overwrites the existing rotation with a rotation around the specified axis by the specified angle.

This is useful for resetting the rotation to a known point.

Parameters
  • angle (float) – Angle to set the rotation to in radians. Positive is clockwise, negative is anticlockwise.

  • axis (Axis) – Axis to rotate around.

Raises

ReadOnlyError – If this object is open for read-only.

set_rotation_2d(angle)

Overwrite the existing rotation with a simple 2d rotation.

Parameters

angle (float) – Angle to set the rotation to in radians.

Raises

ReadOnlyError – If this object is not open for editing.

classmethod static_type()

Return the type of marker as stored in a Project.

This can be used for determining if the type of an object is a marker.

Return type

int

property id: ObjectID[Marker]

Object ID that uniquely references this object in the project.

Returns

The unique id of this object.

Return type

ObjectID

property text: str

The text displayed on the marker.

property shape: Shape

What shape the marker takes in a view.

This must be from the Marker.Shape enum.

property custom_shape_object: ObjectID[Surface]

The ObjectID of the surface used for the custom marker shape.

For best results the surface should be centred at [0, 0, 0] and should fit within a unit sphere centred at the origin.

Raises
  • TypeError – If set to a value which cannot be converted to an ObjectID.

  • ValueError – If set to an ObjectID which is not for a Surface.

Notes

Set this to None to remove the custom shape of the marker.

Examples

Creating a tetrahedron shaped marker at [10, 10, 10] using a custom surface.

>>> import math
>>> from mapteksdk.project import Project
>>> from mapteksdk.data import Marker, Surface
>>> x = 1 / math.sqrt(2)
>>> points = [[1, 0, -x], [-1, 0, -x], [0, 1, x], [0, -1, x]]
>>> facets = [[2, 0, 1], [0, 3, 1], [2, 1, 3], [0, 2, 3]]
>>> project = Project()
>>> with project.new("surfaces/tetra_base", Surface) as new_tetrahedron:
...     new_tetrahedron.points = points
...     new_tetrahedron.facets = facets
>>> with project.new("cad/tetra_marker", Marker) as new_marker:
...     new_marker.text = "tetrahedron"
...     new_marker.custom_shape_object = new_tetrahedron
...     new_marker.location = [10, 10, 10]
property location: Point

Position of the marker as a point ([x,y,z]).

property size: float

The size of the marker in meters. The default is 1.0.

For a marker with a custom shape, the actual size of the marker is the size of the custom shape object multiplied by this property.

Raises
  • ValueError – If set to a value which cannot be converted to a float.

  • TypeError – If set to a type which cannot be converted to a float.

property height: float

The height the marker will appear above the location.

This can be used to make the marker appear a suitable distance above the marked location. This can be useful if having the marker exactly at the marked location causes it to obscure the location it is marking.

Notes

Requires api_version 1.4 or higher.

See also

mapteksdk.project.Project.api_version

Includes a table of applications to api_versions.

property text_colour: Colour

The colour of the text on the marker, represented as an RGBA colour.

See also

marker_colour

The colour of the marker itself.

property marker_colour: Colour

The colour of the marker, represented as an RGBA colour.

See also

text_colour

The colour of the text on the marker.

Notes

Marker colour is currently ignored by markers with custom shapes, however it is intended to be implemented in the future.

The alpha value of the marker colour is currently ignored, though may be supported in the future. It is recommended to set the alpha value to 255.