File Information

Blast Design Specification File

Unlike previous versions, which used the older <proj>.ug_spec specification file, the Ring Design and Explosive Loadings modules now use the new Blast Design specification file (Blasting.spc).The Blasting.spc specification file, which is created through using the Create/Edit Specification File option, is stored in the directory pointed to by the $ENVIS_RESO environment variable, however, it can be copied to the your current data directory.

If the older .ug_spec file exists in your current working directory, then the contents of this file will be used to 'populate' the UG Specification File panel. Upon completing this panel, the older Blast Design specification file, which will be archived and renamed to <proj>.ug_spec-old ., is replaced with the new Blasting.spc file.

{
 "detonators" =
  {
   "dettypes" =
    [
      {
       "det_type" = "SD",
       "delay_list_panel" = 
        {
         "def_delay" = "1A",
         "delaygrid" = 
          [
            "1A",
            "2A",
            "2B",
            "3A",
            "3B",
            "3C",
            "4A",
            "4B",
            "4C",
            "4D",
            "5E",
            "6F",
            "7G",
            "88"
          ]
        }
      },
      {
       "det_type" = "LD",
       "delay_list_panel" =
        {
         "def_delay" = "25",
         "delaygrid" = 
          [
            "00",
            "0",
            "1",
            "2",
            "3",
            "4",
            "5",
            "6",
            "8",
            "10",
            "12",
            "15",
            "18",
            "21",
            "25",
            "30",
            "36",
            "43"
          ]
        }
      },
      {
       "det_type" = "MD",
       "delay_list_panel" = 
        {
         "def_delay" = "0",
         "delaygrid" = 
          [
            "0",
            "3",
            "6",
            "9",
            "12",
            "15",
            "18",
            "21",
            "24",
            "27",
            "30",
            "35",
            "40",
            "45",
            "50",
            "55",
            "60"
          ]
        }
      }
    ],
   "def_dettype" = "LD"
  },
 "drillbits" = 
  {
   "default_bit" = "2.5 inch (64mm)",
   "drill_bit_grid" = 
    [
      [
        "2.5 inch (64mm)",
        64.000000
      ],
      [
        "2.0 inch (51mm)",
        51.000000
      ]
    ],
   "imperial" = "0",
   "metric" = "1"
  },
 "drillrigs" = 
  {
   "def_rig" = ""
  },
 "explosives" = 
  {
   "default_exp" = "7/D",
   "explosives_grid" = 
    [
      [
        "AMEX",
        "BULK",
        1.250000,
        0.820000,
        3,
        {
         "index" = 0,
         "width" = 4
        },
        0,
        0.000000
      ],
      [
        "7/D",
        "STICK",
        2.650000,
        1.180000,
        4,
        {
         "index" = 0,
         "width" = 4
        },
        0,
        0.000000
      ],
      [
        "8/D",
        "BULK",
        2.650000,
        1.180000,
        5,
        {
         "index" = 0,
         "width" = 4
        },
        0,
        0.000000
      ]
    ],
   "interval" = 1.000000
  },
 "loading" = 
  {
   "des_stemming_length" = 10.000000,
   "explosive_range" = 0.000000,
   "min_col_spacing" = 2.000000,
   "min_load_length" = 10.000000,
   "sample_interval" = 5.000000,
   "split_to_intervals" = "1"
  },
 "plotting" = 
  {
   "template_name" = ""
  },
 "toespacing" = 
  {
   "method1" = "1",
   "method2" = "0",
   "method3" = "0",
   "method4" = "0",
   "method5" = "0"
  }
}