Output

Output variograms to a nominated file

Use the Output option to output the currently displayed variograms to a nominated Variography Display Parameters file ( .srf ) and/or a PostScript file ( .ps ). This option can also be used to convert an existing Variography Display Parameters file into a PostScript file.

Instructions

On the Block menu, point to Variography, and then click Output to display the Output panel.

Output all displayed plots

Select this option to output all of the plots that are currently displayed onscreen. The outputted plots will be stored in a Variography Display Parameters file ( .srf ).

The resulting file, which will be stored in your current working directory, is named using the following naming convention:

<proj><specification name>.srf

Output selected plots

Select this option to output a selected group of plots. You will need to specify the number of plots on the X and Y axes, as well as the name of the Variography Display Parameters file ( .srf ) that will be used to store the chosen plots.

The resulting file, which will be stored in your current working directory, is named using the following naming convention:

<proj><file name>.srf

Output results plot

Select this option to output the contents of an existing Variography Display Parameters file ( .srf ). The drop-down list displays all of the .srf files found in the current working directory.

Number of outputted plots on X/Y axis

Specify the number of plots to display on each page of the resulting Variography Display Parameters file ( .srf ) and, if applicable, the PostScript file ( .ps ).

Create postscript file

Select this check box to output the plots to a PostScript file. This option can also be used to convert and display the contents of an existing Statistics Results file.

ID for postscript file

Enter the name of the resulting PostScript file. The resulting file will be stored in your current working directory.

The drop-down list displays all of the Variography Display Parameters files found in the current working directory. If a Variography Display Parameters file is specified, then the resulting PostScript file will be named using the following naming convention:

<Statistics Results file name>.srf.ps

Font

Specify the font that will be applied to the text displayed in the resulting PostScript file. The drop-down list contains the standard PostScript font types.

Line width

Specify the line width that will be applied to all lines displayed in the resulting PostScript file. The line width can either be entered or it can be specified through using the available slider bar.

Fill bars

Select this check box to apply a fill colour (grey) to bars displayed in the resulting PostScript file.

Click OK.

The Variography Display Parameters file and, if applicable, the PostScript file are then generated.

If you chose to only output certain variograms, then the screen is first redrawn to take into account the specified number of plots. You will then need to select the required plots. A rectangle will be placed around each selected plot to indicate that it has been chosen.