Rotate Channel Dip

Use the Rotate Channel Dip option to interactively rotate a channel sample while maintaining the bearing. The rotation is defined by a 3D line. The first point of the line is the starting point of the channel sample, the second point is digitised by you.

The Channel Sample will have the same dip as the 3D line segment, but will maintain its original bearing. To ensure that the digitised end point of the line segment is placed correctly, use the Bearing Input button. The Bearing Input button, which is available from the Digitise toolbar, allows you to create a point at a specified dip and bearing.

If you want to alter both the dip and bearing, then use the Rotate Channel option.

---

Instructions

On the Geology menu, point to Channel Sampling, and then click Rotate Channel Dip.

Select the channel you want to rotate.

Digitise the end point of the line segment.

The channel sample will be rotated.

Confirm the rotation.

Upon confirmation, you can select another channel to rotate.