Reverse View

Use the Reverse View option to flip the current cross-section along its horizontal axis, i.e. mirror the view in the Drillhole Section Window.

To use this option, you must be in the Drillhole Section Window. Use [CTRL] + [Tab] to move between the Primary Window and the Drillhole Section Window.

This option can also be accessed by selecting the Reverse View button from the Geology Section toolbar.

Instructions

• Select Geology menu
• Select Drilling Section submenu
• Select Reverse View option

Once selected, the current cross-section is flipped along its horizontal axis.

Figure 1 : Original Cross-Section

Figure 2 : Mirrored Cross-Section

Select the Reverse View option again, or use the Reverse View button on the Geology Section toolbar, to return the cross-section to its original state.