Reverse

Use this option to reverse the block naming for strips.

Note:  There are limited panels and prompts associated with this option.

---

After loading the desired strip, select Reverse. The Select By Multiple Selection box be displayed. From the dialog box, nominate a selection method, (For example, by layer, object name, etc.) for the blocks to reverse. When prompted, confirm the selection.

Note:   When selecting by layer, the block numbers will be reversed for the entire layer. Therefore, if block number 5 is at the bottom of the srtip and block number 20 is at the top; after reversing block number 5 will be at the top and block 20 will be at the bottom.