Registering a Scan Acquired Using a Vehicle Mount

Scan registration is used to position scans correctly relative to known coordinates.

  1. Register the scans by backbearing alignment angle .

  2. Use Filter > Range to filter the data to improve the speed and accuracy of the registration.

  3. Register the data using Register > Global .

Note: If the scans do not appear to be correct after registration or there are levelling issues, connecting points prior to registration can improve the accuracy of the final result. Select overlapping points on the floor and walls and connect using Edit > Scan connectivity > Smart connect .

Note: Scanner level correction can be displayed by highlighting the scan in the project explorer and selecting Query > Properties twice. Level correction data is displayed in the Report Window.