Reverse

The Reverse option to reverse the block naming for strips. Note there are limited panels and prompts associated with this option.

After loading the desired strip, select Reverse. The Select By Multiple Selection box be displayed. From the dialogue box, nominate a selection method, (For example, by layer, object name, etc.) for the blocks to reverse. When prompted, confirm the selection.

Note that when selecting by layer, the block numbers will be reversed for the entire layer. Therefore, if block number 5 is at the bottom of the srtip and block number 20 is at the top; after reversing block number 5 will be at the top and block 20 will be at the bottom.