File Information

Reserves Specification File: ABCWEST1.ST2 (Terrace Mining)

* MAPTEK: Specifications  4-Dec-1998 10:04:49
BEGIN$DEF SET_UP              
   LIMITS_DB='ABCNTH1.DGD'
   REFERENCE='TOPO.00T'
   OXIDATION='WTHD.TPG'
   OVERBURDEN_CODE='OB'
   OVERBURDEN_DENSITY=2.500
   MIDBURDEN_CODE='MD'
   MIDBURDEN_DENSITY=2.500
   WEDGEABOVE_CODE='WA'
   WEDGEBELOW_CODE='WB'
   PRODUCT_CODE='CO'
   PRODUCT_DENSITY=1.400
   UNDERBURDEN_CODE='UB'
   UNDERBURDEN_DENSITY=2.500
   BASAL='PIT.00T'
END$DEF SET_UP              
BEGIN$DEF BENCH               
   NO_LEVELS           
   BOTTOM=0.000
   HEIGHT=0.000
   BEGIN$TAB BENCHES             
      '50.000'
      'L'
      '60.000'
      'L'
      'DRAIN80.00T'
      'T'
      '100.000'
      'L'
   END$TAB BENCHES             
END$DEF BENCH               
BEGIN$DEF POLYGONS            
   UNIT_CELL_SIZE=1000.000
   BLOCK_DB='ABCTEST1.DGD'
   BEGIN$TAB BLOCKS              
      'S01'
      ' 1'
      ' 5'
   END$TAB BLOCKS              
END$DEF POLYGONS            
BEGIN$DEF SEAM_1_STD          
   PROCESS             
   UNIT_NAME='MAIN'
   UNIT_CODE='MAIN'
   ROOF='MAIN.SRG'
   FLOOR='MAIN.SFG'
   LIMIT_MASK_LAYER='MASKMAIN'
   PRODUCT_DENSITY='&1.40'
   BEGIN$TAB QUALITIES           
      'SU'
      'MAIN.SUG'
   END$TAB QUALITIES           
END$DEF SEAM_1_STD          
END$FILE

* Metric is the default. If imperial units are required you must manually edit the Setup section as follows:

OUT_AREA_UNITS='FT2'        (metric: 'MTR2')
OUT_VOL_UNITS='FT3'         (metric: 'MTR3')
OUT_DIST_UNITS='FT'         (metric: 'METR')
OUT_DENS_UNITS='T/F'        (metric: 'T/M')