Command List

Description

Combine existing block models.

Add a text variable to a nominated block model.

Add numeric variables or, if desired, remove both text and numeric variables from a nominated block model.

Produce a grade/tonnage report for nominated variables. The resulting report can be saved to CSV or XLS format.

Assign block values from one block model to another.

Check a nominated block model for duplicated blocks.

Converts a 'Classic' Vulcan block model into the 'Extended' block model format.

Create a 3D pexel file from a nominated block model.

Create a new block model.

Create a block model using the contents of nominated ASCII block model file.

Create a subblocked block model using the contents of nominated ASCII block model file.

Create a stratigraphic block model using grids.

Create a stratigraphic block model using nominated triangulations.

Deletes blocks in a nominated block model.

Edit attributes, such as the name, description and default value, for variables found in a nominated block model.

Export block values to a nominated ASCII file.

Export block values to a nominated CSV file.

Extract blocks from a block model and save them in another block model file.

Extract blocks from a block model and save them in another block model file.

Perform grade estimation on a nominated block model.

View areas of the block model above a particular cut-off grade.

Perform a sequential Gaussian simulation using the parameters defined in an existing Simulation specification file.

Export block model header information to a nominated ASCII file.

Run the Implicit Modelling process using a designated specification file.

Index a nominated block model.

Intersect a block variable with a nominated triangulation.

Report on the proportion of a block that falls in a nominated triangulation(s)

Create a block model using a nominated CSV file.

Perform pit optimisation analysis using the Lerchs and Grossman analysis program.

Perform pit optimisation using the Lerchs and Grossman optimisation program.

Generate pit/period triangulation shells from Pit Optimiser output.

Perform tri-blocking on a nominated block model.

Reblock a subblocked model into a regularised block model.

Calculate reserves and generate a reserve report.

Reset individual or all variables contained in a nominated block model back to their default value setting.

Run a nominated block model script file.

Use the Stope Optimiser command in the command line to run the Stope Optimiser program.

Import an ASCII file containing block model details and grade estimation results into a pre-existing block model.

Enter general commands, that is, commands that are not associated with a known block model command.

Enter any comments.