Change View Menu Contents
Use this option to rotate the view of design data by indicating the origin of a set of 3D axes and then rotating these axes relative to the current view or to the plan view by a specified angle of rotation.
Use this option to set the 3D view perpendicular to the plane of a selected object.
Use this option to set a cross-sectional 3D view with a specified dip and width of view.
Use this option to set a cross sectional 2D view of a grid or triangulation model that is listed in the horizon file.
Use this option to change the vertical exaggeration.
Use this option to view the displayed data by 'walking' along nominated lines (paths).
Use this option to select the points to look at while 'walking' along nominated lines (paths).
Use this option to select the point from which to view the data.
Use this option to view the data in flying mode. You select the point from which to look and then fly north.
Use this option to view the data in flying mode. You can select the point at which to view the data and the direction in which to fly.
